Manuals / Jonsered / Lawn and Garden / Chainsaw

Jonsered CS 2188 manual What is WHAT?, What is what on the chain saw?

Models: CS 2188

1 44

Download 44 pages 52.55 Kb

Page 5

WHAT IS WHAT?

Jonsered CS 2188

Jonsered AB

Huskvarna, SWEDEN

297

8

27

5

9

	2		4
1			6
		3

22	11	10

7	12	23

21

26

	20	19					16	15	20
			18	28	24	17			14

25

What is what on the chain saw?

1	Cylinder cover	16	Spike bumper
2	Front handle	17	Chain catcher
3	Front hand guard	18	Clutch cover
4	Starter	19	Rear handle with right hand guard
5	Chain oil tank	20	Throttle control
6	Starter handle	21	Throttle lockout
7	Adjuster screws carburettor	22	Decompression valve
8	Choke control/Start throttle lock	23	Combination spanner
9	Rear handle	24	Chain tensioning screw
10	Stop switch	25	Operator′s manual
11	Fuel tank	26	Bar guard
12	Mufﬂer	27	Switch for heated handle (CS 2188W)
13	Bar tip sprocket	28	Oil pump adjustment screw
14	Chain	29	Warning decal
15	Bar

English – 5

Image 5

Jonsered CS 2188 manual What is WHAT?, What is what on the chain saw?

Contents

Operator′s manual English Symbols on the machine KEY to SymbolsSymbols in the operator’s manual Decompression valveThe valve isContents Dear Customer IntroductionWhat is what on the chain saw? What is WHAT?Always use common sense General Safety PrecautionsBefore using a new chain saw Chain brake and front hand guard Machine′s safety equipmentPersonal protective equipment General Safety Precautions Chain catcher Throttle lockoutRight hand guard Vibration damping systemCutting equipment Stop switchMufﬂer General rulesBar Cutting equipment designed to reduce kickbackChain Injuries Some terms that describe the bar and chainGeneral information on sharpening cutting teeth Sharpening your chain and adjusting depth gauge settingTensioning the chain Which could lead to serious, even fatal injuries Chain oil Lubricating cutting equipmentFilling with chain oil Checking chain lubricationChecking wear on cutting equipment Chain drive sprocketNeedle bearing lubrication General Safety Precautions Fitting the bar and chain AssemblyFitting a spike bumper Working with the chainFuel Fuel HandlingFuelling Fuel safetyTransport and storage Long-term storageStarting and stopping Starting and StoppingCold engine Warm engineStopping Working Techniques Basic safety rulesBefore use General working instructionsJam. Always stop the engine before cleaning Terms Basic cutting techniqueLog is supported at both ends. There is a high risk LimbingSafe distance Tree felling techniqueFelling direction Clearing the trunk and preparing your retreatFelling cut Directional cutsFreeing a tree that has fallen badly General adviceFreeing a trapped tree Cutting trees and branches that are in tensionCutting the trunk into logs How to avoid kickbackWhat is kickback? Carburettor with movement limiters MaintenanceCarburettor adjustment Carburettor without movement limiters + 1/4 Checking the front hand guard Checking brake band wearImmediately Checking the inertia brake releaseMufﬂer Changing a broken or worn starter cord StarterTensioning the recoil spring Changing a broken recoil springSpark plug Air ﬁlterFitting the starter Must always be replacedCentrifugal cleaning Turbo Adjustment of the oil pumpLubricating the bar tip sprocket Needle bearing lubricationTemperature -5C or colder Daily maintenance Weekly maintenance Monthly maintenance Maintenance scheduleTechnical data Technical DataSaw chain ﬁling and ﬁle gauges Bar and chain combinationsEN ISO 12100-22003, Cispr 121997, EN ISO EC-declaration of conformityApplies to Europe only Original instructions 1153188-26