SERVICE AND ADJUSTMENTS

TO LEVEL MOWER

Make sure tires are properly inflated to the PSI shown on tires. If tires are over or under inflated, it may affect the appearance of your lawn and lead you to think the mower is not adjusted properly.

VISUAL SIDE-TO-SIDE ADJUSTMENT (See Fig. 23)

•With all tires properly inflated and if your lawn appears unevenly cut, determine which side of mower is cutting lower.

NOTE: As desired, you can raise the low side of mower or lower the high side.

•Go to side of mower you wish to adjust.

•With a 3/4" or adjustable wrench, turn lift link adjust- ment nut (A) to the left to lower LH side of mower, or, to the right to raise LH side of mower.

 

A

Turn nut right

Turn nut left

to raise mower

to lower mower

02948

 

Fig. 23

NOTE: Each full turn of adjustment nut will change mower height about 3/16".

•Test your adjustment by mowing some uncut grass and visually checking the appearance. Readjust, if necessary, until you are satisfied with the results.

PRECISION SIDE-TO-SIDE ADJUSTMENT (See Fig. 24)

•With all tires properly inflated, park tractor on level ground or driveway.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to its highest position.

•At both sides of mower, position blade at side and measure the distance (A) from bottom edge of blade to the ground. The distance should be the same on both sides.

02966

A

A

Fig. 24

20

•If adjustment is necessary, see step in Visual Adjust- ment instructions above.

•Recheck measurements, adjust if necessary until both sides are equal.

FRONT-TO-BACK ADJUSTMENT (See Figs. 25 and 26) IMPORTANT: Deck must be level side-to-side.

To obtain the best cutting results, the mower blades should be adjusted so the front tip is 1/8" to 1/2" lower than the rear tip when the mower is in its highest position.

CAUTION: Blades are sharp. Protect your hands with gloves and/or wrap blade with heavy cloth.

•Raise mower to highest position.

•Position any blade so the tip is pointing straight forward. Measure distance (B) to the ground at front and rear tip of the blade.

•If front tip of blade is not 1/8" to 1/2" lower than the rear

02548

BB

Fig. 25

tip, go to the front of tractor.

•With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear adjustment nut B.

•With a 3/4" or adjustable wrench, turn front link adjust- ment nut (B) clockwise (ltighten) to raise the front of mower, or, counterclockwise (loosen) to lower the front mower.

B

A

Tighten adjust nut

Loosen adjust

B to raise mower

nut B to lower

02950

mower

 

Loosen jam nut A first

Fig. 26

NOTE: Each full turn of the adjustment nut will change mower height about 1/8".

•Recheck measurements, adjust if necessary until front tip of blade is 1/8" to 1/2" lower than the rear tip.

•Hold adjustment nut in position with wrench and tighten jam nut securely against adjustment nut.

Page 19 Page 21
Page 20
Image 20
Jonsered LT2226 A2 manual To Level Mower
Page 19 Page 21

LT2226 A2 specifications

The Jonsered LT2226 A2 is a state-of-the-art lawn tractor designed to deliver exceptional performance and reliability for homeowners looking to maintain their lawns effortlessly. With a robust construction and an array of advanced features, this model stands out in the competitive market of garden maintenance equipment.

One of the primary features of the LT2226 A2 is its powerful 726 cc engine, which ensures efficient cutting and robust performance across various terrains. The engine is engineered for low emissions, making it an environmentally friendly choice for conscientious users. Its high-speed capabilities allow for quicker mowing sessions without compromising on the quality of cut, thus saving valuable time.

The chassis of the LT2226 A2 is built for durability, featuring a strong, steel frame designed to withstand the rigors of regular use. The tractor’s cutting deck is another notable aspect; the 102 cm / 40-inch cutting width enables the lawn tractor to cover more ground in fewer passes. With adjustable cutting heights, users can customize their grass trimming to suit specific lawn care needs.

One of the standout technologies integrated into the LT2226 A2 is the patented articulated steering system. This feature enhances maneuverability, allowing users to navigate tight corners and obstacles with ease. The ergonomic design of the steering wheel and comfortable seat provides superior driver comfort, reducing fatigue during extended mowing sessions.

Moreover, the LT2226 A2 is equipped with a hydrostatic transmission. This advanced transmission system provides seamless acceleration and deceleration, making it user-friendly, especially for those new to riding lawn tractors. The foot-operated pedals facilitate smooth operation without the need for manual gear shifts.

Additionally, the tractor boasts a mulching function that finely chops the grass clippings and returns them to the lawn, acting as a natural fertilizer. This feature not only helps in reducing lawn waste but promotes healthier grass growth.

Safety is a top priority with the Jonsered LT2226 A2. The tractor is fitted with an automatic brake system that engages when the operator leaves the seat, ensuring a heightened safety feature during operation.

In conclusion, the Jonsered LT2226 A2 is a well-rounded lawn tractor that combines power, efficiency, and user-friendly features. Whether you are a seasoned lawn care enthusiast or a beginner, this model is designed to make your mowing experience smooth and productive. With its blend of innovative technology and comprehensive design, the LT2226 A2 is an excellent investment for maintaining a pristine lawn.
Top Page Image Contents