Jotul F 100 USA

Unprotected Surface

Parallel To The Wall

Protected Surface

Parallel To The Wall

PER NFPA 211 or

CAN/CSA-B365

Unprotected Surface

Corner Installation

Important:

Connector heatshields and double wall pipe must be a listed product.

Always follow the manufacturer’s instructions.

Contents

Main Standards Check Building Codes , Installation and Operation Instructions for USA/Canada Installation et fonctionnement pour Canada Table of Contents Standards and Safety Notices Installation Chimney Requirements Connecting to the Chimney Safety Notices Installation Assembly Before Installation Unpack the Stove Flue Collar Installation Install the Ashlip Assemble the Door Knob Chimney Connector Prefabricated Chimneys Chimney Height Chimney Requirements Masonry Chimneys Wall Pass-Throughs In the U.S. In Canada Connecting to the Chimney Masonry Chimney Hearthmount into a Masonry Fireplace Prefabricated Chimneys Clearance to Combustibles B Floor Protection Clearances to Walls and Ceilings Using Shields to Reduce Clearances Alcove Installation Page Jtul F 100 USA Clearance Chart Page Operation Use Solid Wood Fuel Only Controls on the Jtul F 100 USA Air Flow / Performance Break-In Procedure Starting and Maintaining a Fire Adding Fuel The Formation of Creosote Maintenance Ash Removal Glass Care Cleaning Glass Removal or Replacement General Maintenance Gaskets Gasket Replacement Gasket List for the Jtul F 100 USA Chimney System Page Page Quality