Jura Capresso 13429 Setting the time, Programming the automatic switch-on time,  Time,  Unit on

Select this setting if you make mostly black coffees and are prepared to wait for approx. 1 minute before being able to draw steam.

Economy mode 2

Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up each time you make coffee or need to draw steam.

The IMPRESSA switches to economy temperature 5 minutes after you last used it.

Select this setting if you make very few coffees (with or without milk) and are prepared to wait for approx. 30 sec- onds for the machine to get ready.

13.10 Setting the time

You must program the time if you want to use the automatic switch-on function.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 TIME

—:—

Now press the Rotary Switch (4) to start programming.

 TIME

—:—

Turn the Rotary Switch (4) to set the hours.

 TIME

13:00 (example)

Press the Rotary Switch (4) to confirm the hours and to activate the minutes.

 TIME

13:00

Turn the Rotary Switch (4) to set the minutes.

 TIME

13:50 (example)

Press the Rotary Switch (4) to confirm the minutes.

 TIME

13:50

Now turn the Rotary Switch (4) until the following message is displayed:

 EXIT

Now press the Rotary Switch (4) to leave the programming mode.

 SELECT PRODUCT

13.11 Programming the automatic switch-on time

You must program the time if you want to use the automatic switch-on function.

 SELECT PRODUCT

Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal.

 FILTER

NO or YES

Turn the Rotary Switch (4) until the following message is dis- played:

 UNIT ON

—:—

18