OPERATING INSTRUCTIONS
Turn all load equipment ON.
Turn the Isolation Transformer circuit breaker ON. Observe that the 
) is not illuminated (place the Isolation Transformer on a
CAUTION:
If the red LED is continuously flashing, the wall receptacle (powering the Isolation Transformer) is not connected to the system safety ground. Immediately contact an electrician to correct the wiring discrepancy.
IMPORTANT NOTE:
The red LED is not intended to test general wiring integ- rity.
Once the Isolation Transformer has been properly installed per the installation instructions, the Isolation Transformer and load equipment can be turned ON/OFF via the Isolation Transformer circuit breaker (and if not externally circuit breaker equipped, via the panel circuit breaker).
Symbols indicated on this equipment have the following meanings.
Attention, consult ACCOMPANYING
DOCUMENTS
Dangerous voltage
Alternating current
Off (power: disconnection from the mains)
On (power: connection to the mains)
Equipotential terminal
SPECIFICATIONS
Isolation Transformer
■Manufacturer : Victor Company of Japan Limited
■Model No. | : |
|
■Classification | : CLASS I |
|
■Input | : 230 V AC | 1.50 A 50 Hz |
■Output | : 120 V AC | 2.7 A 50 Hz |
Accessories
■Plug retainer bracket | x 4 |
■Torx head screw | x 11 |
■Cover plate | x 3 |
■Flat washer | x 4 |
■Split locking washer | x 11 |
■Input cord holder | x 1 |
TECHNICAL AND SERVICE
ASSISTANCE
JVC offers technical and customer service assistance. Please contact us at the following address.
JVC PROFESSIONAL PRODUCTS (UK) LIMITED ULLswater House, Kendel Avenue, London W3 OXA, United Kingdom
TEL: (0181)
FAX: (0181)
JVC PROFESSIONAL PRODUCTS GmbH
Grüner Weg 10, 61169 Fiedberg/Hessen, Germany
TEL: (06031) 6050
FAX: (06031) 605180
0200IYV*ID*VP