G E N E R A L I T E M S 
13
CHANNEL SUMMARY
You can add or delete channels from the channel scanning. You can also lock out any “unauthorized” viewers from one or up to all 181 channels.
To CHANNEL SUMMARY
To operate
CHANNEL GUARD - LOCK
To CHANNEL SUMMARY
To operate
To the Lock column
The access code zero (0) to lock or unlock that channel
NOTES:
There are two sections in Channel Summary.
To move up and down a column (e.g. from channel to channel) use the
ADD
You can manually set channels to scan that were too weak to be picked up during Auto Tuner Setup. (If you have not performed the Auto Tuner Setup described on page 9, do so
CH | ADD |
|
| ||
01 | X | – |
02 | X | – |
03 | X | – |
04 | X | – |
05 | X | – |
: | CH | ADD |
|
| |||
: | 06 | X | – |
: | 07 | – |
|
| |||
: | 08 | – |
|
| |||
: | 09 | X | – |
: | 10 | X | – |
Channel m button.
To move from item to item (e.g. from channel number to add to lock) use the
now.) Conversely, if a channel was too weak to receive a good picture but was picked up anyway, delete it by removing the X.
CHANNEL mto select the channel
Use the Channel m button to go to any
other channel you want to lock
Exit when finished
arrow up/down keys.
Noise Muting will not work while you operate the Channel Summary.
CH | ADD |
|
| ||
01 | X | – |
02 | X |
|
| ||
03 | – | – |
04 | X | – |
05 | X | – |
: | CH | ADD |
|
| |||
: | 06 | X | – |
: | 07 | – | – |
: | 08 | – | – |
: | 09 | X | – |
: | 10 | X | – |
CHANNEL GUARD MESSAGE:
This message appears when a viewer attempts to watch a guarded channel:
THIS CHANNEL IS LOCKED BY CHANNEL GUARD.
PLEASE ENTER LOCK CODE BY 10 KEY PAD TO UNLOCK IT.
To the ADD column
To include or delete from scan
Exit when finished
Note: Channels set to scan will be marked with an X.
Note: Some cable systems experi- ence interference from radio frequencies on Cable Channel
95.If you like, you can delete this channel from scanning by removing the X.
NO.
To watch a channel you have locked, enter the lock code using the 10 key pad.
If the wrong lock code is entered, this message will flash on the screen:
INVALID LOCK CODE !
