Initial Setup

Auto Tuner Setup

The auto tuner setup function is described on page 19 as the interactive plug-in menu. If you need to run the auto tuner setup again, follow the steps below.

Press the MENU button

π† To AUTO TUNER SETUP

è To operate è To choose CABLE or AIR

To move to START è To start Auto Tuner Setup

Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the message PROGRAMMING OVER! appears onscreen.

Channel Summary

Channel summary allows you to customize the line-up of channels received by your TV. You can add or delete channels from the line-up or prevent any unauthorized viewers from watching any or all 181 channels.

Press the MENU button π† To CHANNEL SUMMARY √® To operate

The Channel summary screen will now be displayed with

the channels set to scan marked with an “¸”. You can delete channels from the scan by removing the “¸”. If any channels were missed during auto tuner setup and

you wish to add them, you may by placing an “¸” next to the channel number.

π† To the SCAN column √® To include or delete from scan

Press the EXIT button when finished

You can block access to a channel by activating the channel lock.

Press the MENU button

π† To CHANNEL SUMMARY √® To operate

π† To the Lock Column ( )

Press the ZERO button to lock or unlock that channel Press the EXIT button when finished

26

Page 26
Image 26
JVC AV-27D304 manual Initial Setup, Auto Tuner Setup, Channel Summary