JVC AV-2988SE specifications Customized setting, VIDEO-2 Setting, Display, Beep

Customized setting (continued)

VIDEO-2 SETTING

You can set the VIDEO-2 SETTING according to the video signal output from external devices connected to the VIDEO-2 terminal. Select VIDEO-2 SETTING in INSTALL menu, then choose a setting (Factory setting is COMPONENT).

MENU INSTALL menu VIDEO-2 SETTING

DISPLAY

You can display the programme number, video terminal number and PR list on the screen.

Press the DISPLAY button to select the desired mode:

ON OFF PR LIST

VIDEO	If a normal video signal (composite video signal) is input.
COMPONENT	If a component video signal (Y/CB/CR) is input.

You must choose a setting according to the signal that you input to VIDEO-2. (If you input the VIDEO Signal or VCR Signal to VIDEO-2, you must set VIDEO-2 SETTING to VIDEO.)

For connecting methods, see “Additional Preparation” on page 22.

BEEP

You can use the BEEP function to alert you during DVD AUTO SIGNAL DETECT, AI ECO SENSOR Detect, Stereo Detect, ON TIMER/OFF TIMER operations and when some buttons on the remote control are pressed.

Select BEEP in the INSTALL menu, then choose ON or OFF.

Choose a TV channel or a VIDEO terminal.

1Press the DISPLAY button to display the PR LIST.

2Select a programme number or video terminal by pressing the 5/∞ button to move up/down on the programme number or press the 2/3 button to skip for each 7 programme numbers, then press MENU/OK button.

PR LIST

PR			CH/CC
V1
V2
V3
AV
1	■	CH 09
2		■	CC 76
3		■	CC 78
			MENU : OK
-7			+7

MENU INSTALL menu BEEP

When the volume is level 0, then BEEP function is not available.

About the basic operations of the menu, please see the “How to operate menus and menus locations” on page 5.

18