JVC AV-29W33 VIDEO-2 SET, Auto CH Preset, If a component video signal Y/CB/CR signals is input

Using the TV’s menus

VIDEO-2 SET

Set the VIDEO-2 SET correctly according to the video signal input from the external device connected to the VIDEO-2 terminal. If this setting is incorrect, images will not be displayed.

1Press MENU T to display the “MENU 2” menu, then select “VIDEO-2 SET”.

	MENU	2
	AUTO SHUTOFF	ON
	CHILD LOCK	ON
	BLUE BACK	ON
	VIDEO-2 SET	COMPONENT
SELECT BY		EXIT BY
OPERATE BY -+		DISPLAY

2Set the VIDEO-2 SET according to the video signal input from the VIDEO-2 terminal.

If a normal video signal (composite video signal) is input:

Press the MENU / buttons to select “VIDEO”.

If a component video signal (Y/CB/CR signals) is input:

Press the MENU / buttons to select “COMPONENT”.

AUTO CH PRESET

You can automatically preset all TV channels that can be received by your TV to channels.

1Press MENU T to display the

“MENU 3” menu, then select “AUTO CH PRESET”.

	MENU	3
	AUTO CH PRESET
	CHANNEL SKIP
	LANGUAGE	ENGLISH
	MTS STEREO	SAP MONO
SELECT BY		EXIT BY
OPERATE BY -+		DISPLAY

2Press MENU / .

The sub-menu is displayed.

TUNER MODE:CABLE AIR

START
SELECT BY	EXIT BY
OPERATE BY -+	DISPLAY

3Press MENU / to select “CABLE” or “AIR” .

4Press MENU Tto select “START”.

5Press MENU / to start the AUTO CH PRESET function.

“>>>ON SEARCH” is displayed on the screen.

When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed.

To stop the AUTO CH PRESET:

Press the MENU / button.

13