JVC AV 30W777 Connecting to an AV Receiver using your televisions V1 Smart Input, Quick Setup

Quick Setup

Connecting to an AV Receiver using your television's V1 Smart Input

By connecting your AV Receiver to your television's V1 Smart Input, you can watch picture sources from many different devices, without having to change or use the other input connections on your TV. This allows you to free up the other input connections so you can connect more devices to your television.

AV Receiver

MONITOR

OUT

Y

PB

PR MONITOR OUT

TV Rear Panel

INPUT-3	INPUT-2	INPUT-1
		COMPONENT VIDEO
		VIDEO-2	VIDEO-1
S-VIDEO	S-VIDEO
OVER		OVER	Y
VIDEO	VIDEO
L	L
AUDIO	AUDIO	AUDIO
R	R	R

1)Connect an S-Video Cable from the AV Receiver's MONITOR OUT, to the S-Video INPUT-1 on the back of your television.

2)Connect a Yellow Composite Cable from the AV Receiver's MONITOR OUT, into the VIDEO INPUT-1 on the back of your television.

3)Connect a Green Component Cable from the AV Receiver's Y MONITOR OUT, into the Y VIDEO INPUT-1 on the back of your television.

4)Connect a Blue Component Cable from the AV Receiver's PB MONITOR OUT, into the Pb VIDEO INPUT-1 on the back of your television.

5)Connect a Red Component Cable from the AV Receiver's PR MONITOR OUT, into the Pr VIDEO INPUT-1 on the back of your television.

Note:

•Please refer to your AV Receiver instruction manual for more information on connecting your speakers and other devices like a DVD player.

•Use your AV Receiver's remote to switch to the different devices you have connected.

•Some AV Receivers may not respond when the V1 Smart Input function is turned on, see page 49.

•If you have video connections for each input device connected to your AV Receiver, you should not connect them using both S-Video and Composite connection at the same time when you are using V1 Input as the V1 Smart Input. In this case we recommend using the S-Video connection.

19