4;
3LFWXUH#IHDWXUHV3LFWXUH#IHDWXUHV3LFWXUH#IHDWXUHV3LFWXUH#IHDWXUHV
To display the PICTURE FEATURES menu:
1Press the 3 button to display MENU (main
menu)
2Press the ë buttons to choose PICTURE
FEATURES, and press the 3 button
■
■■

■$872#915

$872#915$872#915

$872#915

VNR Stands for “video noise reduction”.
The AUTO VNR function reduces any “noise” (interference or
snowing) in the current picture. The function also adjusts the
optimum sharpness of the picture (SHARP).
1Press the ë buttons to choose AUTO
VNR
2Press the ì buttons to choose AUTO
MIN:
The AUTO VNR function is cancelled. If you set the
mode to AUTO but feel that the sharpness of the original
picture has not been reproduced fully, change the mode
to MIN. However, any noise remaining in the original
picture may be emphasized.
MAX:
This mode always reduces any noise as much as
possible, irrespective of state of the picture. When you
set the mode to AUTO but still notice some noise,
change the mode to MAX. However, this may reduce the
sharpness of the picture.
3Press the 3 button to complete the
setting.
The menu disappears.
■
■■

■&2/285#6<67(0

&2/285#6<67(0&2/285#6<67(0

&2/285#6<67(0

The colour system is chosen automatically. However, if the
picture is not clear or no colour appears, choose the colour
system manually.
1Press the ë buttons to choose COLOUR
SYSTEM. Then press the 3 button
The sub-menu of the COLOUR SYSTEM function
appears.
2Press the ì buttons to choose the
appropriate colour system.PAL:
PAL system
NTSC 3.58:
NTSC 3.58 MHz system
NTSC 4.43
NTSC 4.43 MHz system
AUTO:
This function detects a colour system from the input
signal. You can only use this when you are viewing a
picture from programme number PR 0 (AV), or on EXT
terminal.
3Press the 3 button to complete the
setting
The menu disappears.
•The AUTO function may not work properly if you
have poor signal quality. If the picture is abnormal in
the AUTO function, choose another colour system
manually.
•You cannot choose NTSC 3.58 or NTSC 4.43 for
programme numbers PR 0 (AV) to PR 99.
■
■■

■7=6#$872#$63(&7

7=6#$872#$63(&77=6#$872#$63(&7

7=6#$872#$63(&7

This function only works when the ZOOM mode is set to
AUTO(WSS) mode. It sets the ZOOM mode you want to use
for when a WSS signal is not included in the broadcast signal
or the signal from an external device. You can choose one of
three ZOOM modes.
•For details of the AUTO(WSS) mode, see the “AUTO
(WSS)” section within “3 ZOOM button” on page11.
1Press the ë buttons to choose 4:3 AUTO
ASPECT. Then press the 3 button
The sub-menu of the 4:3 AUTO ASPECT function
appears.
2Press the ë buttons to choose a ZOOM
mode
3Press the 3 button to complete the
setting
The menu disappears.
WFT1EK_E2.fm Page 18 Wednesday, January 17, 2001 9:30 AM