JVC BC50R user manual Basic TV Operation, Exit Retail Mode, Changing Channel, To Browse Channel

Basic Operations

Auto Scan

Select the Signal Type of your TV input and start auto scan.

	Signal Type:			Cable
			Start Scan
Move	Change	OK	Select		RETURN	Previous Setup	INFO	Exit

7 Press OK to start channel scan.

Scanning

Channel scan in process, if you want to stop scanning, please press "Stop Scan".

Scan Status:

0%

Analog Channel:	0
Digital Channel:	0

Stop Scan

OK Select

Note:

t
Scanning may take some time to complete.

t
Select Stop Scan to cancel the auto scan at anytime.

8 When auto scan is complete, press OK to continue.

Scan Finish

Channel scan completed.
Analog Channels:	12
Digital Channels:	26

OK

OK Select RETURN Previous Setup INFO Exit

9 Press OK to complete setup.

Finish

Initial Setup has finished, please press "OK" to exit Setup Wizard.

Exit Retail Mode

1 Press RETURN.

2 Press or to select “OK”, then press OK to confirm.

Do you wish to exit Retail Mode?

OKCancel

Basic TV Operation

Changing Channel

Press the number buttons to directly select channels.

Note: After pressing the number buttons, there will be a few seconds delay before the TV changes channel. To change to the channel right away, press ENT after pressing the number buttons.

To Browse Channel

Press the Channel up/down buttons on the

remote control or CH , CH on the TV to increase or decrease the channel.

CH	Press to scroll through the
	channels manually.

To Select Analog Channels

1~9	Press 1~9 as needed. Example,
	to select channel 2, press 2, then
	press ENT.
10~99	Press the 2 digits in order.
	Example, to select channel 15,
	press 1, 5, then ENT.
100~135:	Press the 3 digits in order,
	Example, to select channel 130,
	press 1, 3, 0, then press ENT.

ENGLISH

OK

19

OK Select RETURN Previous Setup INFO Exit