Getting Started
Continued 
Unpacking
After unpacking, check to be sure that you have all the following items.
The number in the parentheses indicates the quantity of the pieces supplied.
•AM (LW/MW) loop antenna (1)
•FM antenna (1)
•Remote control (1)
•Batteries (2)
If any is missing, consult your dealer immediately.
Putting the Batteries into the Remote Control
Insert the batteries —
When the remote control can no longer operate the unit, replace both batteries at the same time.
1 |
|
2 | |
3 |
|
•DO NOT use an old battery together with a new one.
•DO NOT use different types of batteries together.
•DO NOT expose batteries to heat or flame.
•DO NOT leave the batteries in the battery compartment when you are not going to use the remote control for an extended period of time. Otherwise, it will be damaged from battery leakage.
Connecting Antennas
FM antenna
| N | TE | N | N | A |
A |
| ||||
|
| ||||
|
|
| |||
|
|
|
| ||
|
|
|
|
|
| EXT | FM antenna (supplied) |
| LOOP | |
FM | 75 | L |
| ||
CO | AXIA |
|
1Attach the FM antenna to the FM 75 Ω
COAXIAL terminal.
2Extend the FM antenna.
3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.
About the supplied FM antenna
The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.
To connect an outdoor FM antennaBefore connecting it, disconnect the supplied FM antenna.
Outdoor FM antenna (not supplied)
ANTENNA |
| |
| XT | P |
| O | |
| LO |
|
FM | 75 | L |
| ||
CO | A |
|
A 75 Ω antenna with coaxial type connector (DIN 45325) should be used.
