Getting Started, Supplied Accessories, FM antenna

Getting Started

Continued

Supplied Accessories

Make sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied.

•AM loop antenna (1)

•FM antenna (1)

•AC power cord (1)

•Remote control (1)

•Batteries (2)

If anything is missing, consult your dealer immediately.

Connecting Antennas

FM antenna

FM antenna (supplied)

1Attach the FM antenna to the FM COAXIAL 75 Ω terminal.

2Extend the FM antenna.

3Fasten it up in the position which gives you the best reception, then fix it on the wall, etc.

About the supplied FM antenna

The FM antenna supplied with this unit can be used as temporary measure. If reception is poor, you can connect an outdoor FM antenna.

To connect an outdoor FM antenna

Before connecting the antenna, disconnect the supplied FM antenna.

Outdoor FM antenna

(not supplied)

Coaxial cable (not supplied)

A 75 Ω antenna with coaxial type connector

(IEC or DIN 45325) should be used.

Page 9

Image 9

JVC CA-UXH33, UX-H30 manual Getting Started, Supplied Accessories, Connecting Antennas, To connect an outdoor FM antenna

Contents

Micro Component System Important for Laser Products UX-H35/UX-H33/UX-H30 Precautions IntroductionAbout This Manual Contents Main Unit Location of the ButtonsTop view Front view Main unit Display window Display window Tape Tuner AUX Remote Control Connecting Antennas Supplied AccessoriesGetting Started FM antenna Turn the AM loop antenna until you have the best reception Connecting SpeakersRelease your finger from the clamp To connect an outdoor AM MW antenna To connect the AC power cord Connecting Other EquipmentTo remove the speaker grilles To connect an audio equipment When using the unit in your car Putting the Batteries into the Remote Control Common Operations Setting the Clock Adjusting the Volume Turning On the PowerAdjusting the Tone Bass/Treble Reinforcing the Bass Sound Presetting Stations Tuning in to a Station Receiving FM Stations with RDS Tuning in to a Preset Station Searching for Programs by PTY Codes PTY Search Changing the RDS InformationPress Display orange-colored. Display Press PTY Search Press TA/NEWS/INFO until Switching Temporarily to a Program Type of Your ChoiceData type you want Appears on the display Wait for about 3 seconds after Specifying the data type Playing Back Discs When playing a CD-R or CD-RWPress 0 Open on the unit General notes Programming the Playing Order of the Tracks-Program Play Basic Disc Operations Playing at Random-Random Play To check the program contentsRepeating Tracks-Repeat Play Press Random Playing Back a Tape Playing Back TapesPress for cassette deck on the unit Put a cassette in with the exposed part of the tape down Recording To record on both sides-Reverse ModeRecording on a Tape To protect your recording One Track Recording Disc Direct RecordingPress ONE Touch Repeat steps 2 and 3 to record other tracks you want Using Daily Timer and Recording Timer Using the TimersSet the on-time when you want the unit To turn on Set the off-time when you want the unit To turn off standby Select the volume level Adjust the clock if you needTo deactivate the timer temporarily With the source to play Using Sleep Timer Using Snooze TimerHow the Sleep Timer actually works Press Sleep Cleaning the unit MaintenanceHandling cassette tapes Handling discs Symptom TroubleshootingCause Action Additional Information Alarm functionDescription of the PTY codes Test function Specifications 0103MWMMDWJEM

JVC CA-UXH33, UX-H30 manual Getting Started, Supplied Accessories, Connecting Antennas, FM antenna

Models: SP-UXH33 UX-H30 CA-UXH33