ENGLISH

[Connecting to 5.1ch subwoofer output]

Set the LPF switch to

When no remote output is equipped for

AOFFB.

your car receiver, connect to the ACC

 

power.

 

ACC power cord

 

CS-DA1

Crimp connector

Power cord

Blue/White

Remote input

TO

SPEAKER

INPUT

Speaker

input

TO

Remote output

REMOTE

 

OUT

 

This is not used when LINE IN terminal is used.

Pin cord (not supplied)

JVC Car receiver, etc.

L-shaped pin plug relay cord

 

5.1ch subwoofer output

 

Fuse

 

Yellow

POWER LEAD

15A

 Connect only to the plus +

 

 

side of the battery.

Black

 Connect to the metal part

GROUND(such as the chassis) of the car.

Remote controller

NOTES:

•Set the subwoofer output level of the car stereo to the maximum and use the remote control to adjust the volume of the unit. (However, when the sound of the unit becomes distorted, lower the subwoofer output level at the 5.1ch decoder.)

•When the subwoofer output is 1 channel, connect to Lch. Insulate plugs that are not used with vinyl tapes.

12