Preparation (continued) | Do not turn on the power until you complete the connection. |
|
|
Preparation
Connecting the subwoofer to the main unit
Only for
Subwoofer | Peel off the protective sheets | |
from both sides of the sub- | ||
| ||
| woofer. | |
| Main unit | |
Rear view | Rear view |
System cable (supplied)
Align the 5 marks on the terminals and the system cable.
■Selecting the voltage for your area (Only for countries/areas other than Australia or Hong Kong)
Before connecting the power cable of the sub- woofer to an AC outlet, you must set the correct voltage for your area.
Slide the voltage selector on the sub- woofer to the correct voltage for your area.
•Confirm that the position of the voltage selector is compatible with the voltage in your area.
Subwoofer (rear view)
■CAUTION
•Do not connect the power cable of the sub- woofer to an AC outlet before setting the voltage selector on the subwoofer and completing all connections.
Speaker layout
Center surround speaker
Left speaker | Right speaker |
| Subwoofer |
■CAUTION
•An incorrect connection may damage the speak- ers. Properly connect the cables to the speaker terminals.
•Do not
•The supplied speakers are manufactured exclu- sively for use with the supplied main unit as parts of the
•Do not connect other speakers together with the supplied speakers. The change in impedance may damage the main unit and the speakers.
•Improper speaker cable connection spoils the stereo effect and sound quality.
•Most of the supplied speakers* are magnetically shielded, but color irregularity may occur on the TV depending on some conditions. To prevent color irregularity, set up the speakers following the instructions below.
1.Turn off the main power of the TV before setting up the speakers.
2.Place the speakers enough distance from the TV so that they do not cause color irregularity on the TV.
3.Wait for approximately 30 minutes before turning on the main power of the TV again.
*The subwoofers for
11