JVC DLA-RS2 F Turn off the power, b Adjust the focus, c Adjust the image size zoom, d To end

ENGLISH

bAdjust the focus

ENTER

Focus

Press for 1 second
or more	Adjust accordingly by
	pressing the up down buttons

cAdjust the image size (zoom)

ENTER Zoom ENTER

Adjust accordingly by pressing the up down buttons

zSwitches between “Focus” and “Zoom” whenever the [ENTER] button is pressed.

dTo end

EXIT

F Turn off the power

OFF

While a confirmation screen is displayed

OFF

ASTANDBY/ON

Blinking (Red)

Cool Down mode

ASTANDBY/ON

Light on (Red)

zThe power cannot be turned off within approximately 90 seconds after it has been turned on. Start operation only after 90 seconds time.

zYou can also press the [STANDBY/ON] button on the unit to turn off the power. (pP11)

zPut back the lens cap after use to prevent the lens from dirt.

zPull out the power plug when the unit will not be used for a prolonged time.

TIPS

You can hide the image

temporarily

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

You can hide the image temporarily.

HIDE A STANDBY/ON

Green light blinks when

the image is hidden

zPress the [HIDE] button again to display image.

zThe power cannot be turned off when the image is temporarily hidden.

MEMOAbout Cool Down mode

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

zThe Cool Down mode is a function to cool down the lamp for approximately 60 seconds after projection is complete.

This function prevents the internal parts of the unit from deformation or damage due to overheating of the lamp. It also prevents lamp blowout and premature shortening of lamp life.

zDuring Cool Down mode, the [STANDBY/ON] indicator blinks in red.

zAfter the Cool Down mode is complete, the unit automatically returns to standby mode.

zDo not pull out the power plug during Cool Down mode. This may shorten the lamp life and cause a malfunction.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

21