JVC DR-MV1S Slow Motion, Skip Search, Still Picture/Frame-By-FramePlayback, Marking Positions To Play Back Again Later, Resume Function, MARK, MARK, SLOW –, SLOW +

OPERATIONS ON DVD DECK EN 27

Still Picture/Frame-By-Frame Playback		NOTES:
		● “DISC RESUME” setting works on DVD VIDEO, VCD and already
		finalised DVD-R/DVD-RW (video mode) discs. For other types of
		discs, the function under “ON” setting will be applied even if
		“RESUME” is set to “DISC RESUME”. ( pg. 74)
1 Press 9 to pause during playback.
		● If you stop the playback of a disc for which an resume point has
2 Press 9 or w e to activate frame-by-frame playback.		already been memorized, the memory will be updated with the new
		resume point.
● Each press of 9 advances the still picture frame by frame.		● After the unit has memorized the resume point for 30 discs,
● Each press of w e advances/reverses the still picture frame by		remembering a new resume point will cause the unit to delete the
frame.		oldest memorized point. Stopping playback of a disc for which a
● Frame-by-frame playback for reverse direction cannot be performed		resume point is already stored may change the order in which the
with Video CD discs.		points are stored. This may potentially change the order in which
● To resume normal playback, press 4.		points are deleted.
Slow Motion		● When the unit memorizes a resume point for a disc, it also
		remembers audio language, subtitle and angle settings.
		● This function may not work for some Video CD.
		● When “RESUME” is changed to “ON” or “OFF” ( pg. 74), resume
		points of the discs memorized with “RESUME” set to “DISC
		RESUME” will be cleared.
1 Press 9 to pause during playback.
		● Resume points are memorized for each side of a double-sided disc.
2 Press SLOW – (3) or SLOW + (5).		Marking Positions To Play Back Again Later
● Each press of SLOW – (3) or SLOW + (5) increases the slow
motion speed for each direction (from 1/16 to 1/2 times the normal
speed).
● Slow motion for reverse direction cannot be performed with Video CD
discs.
		It is possible to mark positions (up to 999 points) where you want to
OR
		play back once again later, and start playback from a marked
Press SLOW – (3) or SLOW + (5) for 2 or more seconds.
		position. Marking onto DVD-RAM/RW/R discs when recording is
Skip Search		helpful to locate a start point when you play back the discs later.
		To mark positions:
		During playback, press MARK at
		positions you want to mark.
		● “MARK” appears on the TV screen.
During playback, press	.	You can easily locate the marked
● Each press initiates an approximately 30-second period of fast-		positions using 2 or 6 when you
motion playback. Normal playback resumes automatically.		play back the disc.
Resume Function		To delete the marked positions:
		While paused, press 2 or 6 to
		locate a marked position you want to
		delete, then press MARK.
		● Crossed “MARK” appears on the TV
		screen, and the marked position is
It is possible to memorize the position where you stop playback
		deleted.
and resume playback from that position.
		NOTES:
● Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 74)

1 Press 8 during playback to memories a resume point.	● When a monaural program changes to a stereo program while
	recording, a mark signal is automatically recorded.
● The unit enters Resume Stop mode and memorises the position
	● When a DVD-R/RW (Video mode) disc is finalized, marked points
where you have stopped playback as a resume point. (The inside of
	marked before finalizing will be deleted, and programs will be divided
the disc status indicator on the front display panel blinks while
	automatically into “chapters” approximately every 5 minutes.
memorising.)
	( pg. 79)
● The unit retains a memory of the resume points of the last 30 discs
played back, even though they have been ejected if “RESUME” is set
to “DISC RESUME”. ( pg. 74)
● To clear the resume points:
(The inside of the disc status indicator stops blinking and lights.)
When “RESUME” is set to “ON”:
• Press 1 to turn off the unit.
• Press x (OPEN/CLOSE) to take out the disc.
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
When “RESUME” is set to “DISC RESUME”:
• Set “RESUME” to “OFF”. ( pg. 74)
• Press 8 in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by selecting
an item, etc.
2 Press 4 in stop mode to resume playback. The unit starts
playback from the resume point.