~TV/monitor
Composite video |
|
cord (supplied) |
|
| |
(not supplied) |
|
Green | Red |
| Blue |
Component video cord (not supplied)
•To select progressive scanning mode (see page 15), use COMPONENT jacks.
•Connect the VIDEO jack,
ŸDigital audio component
OPTICAL
DIGITAL
OUTPUT
Protective cap
•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 38). If the setting is incorrect, loud noise may be generated causing damage to the speakers.
!Auxiliary equipment
Red
Stereo audio cord (not supplied)
White
⁄AM/FM antenna
To assemble the AM loop antennaTo connect AM/FM antennaAM loop antenna (supplied)
Turn it until the best reception is obtained.
FM antenna (supplied)
Extend it so that you can obtain the best reception.
For better AM/FM receptionAM loop antenna (supplied)
Keep it connected.
Extend it horizontally.
FM outdoor antenna (not supplied)
•Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
•Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.
4