To adjust the picture tone

1Select “USER1” or “USER2.”

• Follow steps 1 and 2 explained on page 16.

2Select a parameter you want to adjust.

Setting the Clock

Remote

ONLY

Without setting the built-in clock, you cannot use the Daily Timer (see page 30) and Sleep Timer (see page 18).

•To exit from the clock setting, press CLOCK/TIMER as required.

•To go back to the previous step, press CANCEL.

1Activate the clock setting mode.
GAMMA

Adjust if the neutral color is bright or

 

dark (–3 to +3).

 

 

BRIGHTNESS

Adjust if the entire picture is bright or

 

dark (–8 to +8).

 

 

CONTRAST

Adjust if the far and near positions

 

are unnatural (–7 to +7).

 

 

SATURATION

Adjust if the picture is whitish or

 

blackish (–7 to +7).

 

 

TINT

Adjust if the human skin color is

 

unnatural (–7 to +7).

 

 

SHARPNESS

Adjust if the picture is indistinct

 

(–8 to +8).

 

 

3Adjust the parameter.

4Repeat steps 2 to 3 to adjust other parameters. To erase the screen, press VFP again.

•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode is selected (see page 30).

2Adjust the hour.3Adjust the minute.

Now the built-in clock starts working.

To check the current clock time during play

Clock

Source information

(at the same time)

•While playing a DVD or MP3, you cannot check the current clock time (see page 9).

17