PICTURE SOURCE
You can obtain optimal picture quality by selecting an appropriate
Select one of the following:
AUTO: Normally select this.
When playing back a disc containing both video and film sources, the System automatically changes the processing to match it to the picture type (film or video source) of the current chapter.
FILM: To play a film source disc.
VIDEO: To play a video source disc.
SCREEN SAVER
You can activate or deactivate screen saver while operating the
Select one of the following:
ON: The picture on the TV screen becomes dark when no operation is done for about 5 minutes.
OFF: To cancel the screen saver.
FILE TYPE
If both audio tracks (MP3 files) and still pictures (JPEG files) are recorded on a disc, you can select which to play.
Select one of the following:
AUDIO: | To play MP3 files. |
STILL PICTURE: To play JPEG files.
7AUDIO Setup Menu
You can adjust the sound settings of the System.
AU DI O
| DIGITAL AUDIO OUTPUT | STREAM/PCM |
| |
| DOWN MIX |
| DOLBY SURROUND |
|
| D. RANGE COMPRESSION AUTO |
| ||
|
|
|
|
|
|
|
|
|
|
| SELECT | USE | TO SELECT. USE ENTER TO CONFIRM | |
| ENTER | TO EXIT, PRESS [ SET UP ] . | ||
|
|
|
|
|
DIGITAL AUDIO OUTPUT
When using the digital output terminal on the rear, set this correctly according to the connected component.
Select one of the following:
PCM ONLY: To connect to a linear PCM digital equipment.
DOLBYDIGITAL To connect to a Dolby Digital decoder
/PCM:or an amplifier with a
Digital decoder.
STREAM/PCM: To connect to a DTS decoder or an amplifier with a
• See also “OPTICAL DIGITAL OUT Signals” on page 42.
DOWN MIX
When using the digital output on the rear, set this correctly according to the connected component.
When playing a
Select one of the following:
DOLBY To connect an amplifier with the Dolby SURROUND: Pro Logic decoder.
STEREO: To connect a conventional stereo amplifier, receiver, MD recorder, etc.
34