English
Playing Back CDs
This unit can play back audio CDs and
Loading a Disc
Program Play
You can arrange the order in which the tracks are played before you start playing. You can program up to 60 tracks.
1 In stop mode, press | PROGRAM |
PROGRAM. |
|
1 | Press CD/RANDOM to |
| RANDOM | ||
| CD | ||||
| select CD mode. |
| |||
|
|
|
|
| |
2 | Press 0 OPEN/CLOSE. |
|
|
| OPEN/ |
|
|
| |||
|
|
| |||
| The disc tray slides out. |
|
|
| |
|
|
|
| CLOSE | |
The PROGRAM indicator starts blinking.
2 Press 4 or ¢ repeatedly to select the desired track.
SEARCH/TUNING
The current program number starts blinking.
3 Load a disc with the label side facing up.
4 Press 0 OPEN/CLOSE to |
| OPEN/ |
| ||
close the disc compartment. |
| |
| CLOSE | |
|
| |
|
|
|
|
|
|
The total number of tracks and the playing time of the disc appear on
3 Press PROGRAM to store | PROGRAM |
| |
the selected track. |
|
“00” and the next program number appear on the display.
4 Repeat steps 2 and 3 to store other tracks.
•You cannot program more than 60 tracks. If you attempt to do it, “FULL” will flash on the display.
To review the programed sequence
PROGRAM
Press PROGRAM repeatedly in stop mode. The program number and track number are displayed in succession.
the display.
Basic CD Operations
To modify the program
Press PROGRAM repeatedly to select the program number with which you want to change the track, then repeat
PROGRAM
1 Press 3/8 to start playback.
The 3 indicator lights up and the track number and elapsed playing time of the current track appear on the display.
2 To stop playback, press 7.
To interrupt playback
Press 3/8.
PLAY/PAUSE
STOP/CLEAR
PLAY/PAUSE
steps 2 and 3 above.
To play the programed tracks
Press 3/8.
•During program play, you can press 4 or ¢ to select the desired track in the program.
PLAY/PAUSE
The 3 indicator and the playing time starts blinking.
notes If you press REPEAT ST/MONO during program play
To resume playback, press 3/8 again.
The current track or all programed tracks are played repeatedly.
To select a desired track
Press 4 or ¢ repeatedly until the desired track appears on the display.
SEARCH/TUNING
To clear the program |
|
|
|
Press 7 in stop mode. | STOP/CLEAR | ||
The PROGRAM indicator disappears |
|
|
|
|
|
| |
|
|
| |
|
|
| |
from the display. |
|
|
|
To search for a particular point during playback
Press and hold 4 or ¢ to locate the | SEARCH/TUNING | |
desired point. |
|
|
|
| |
•The stored program is cleared when the disc compartment is opened.
