22

Using the Timers

Setting the SLEEP Timer

(Using the Remote Con trol)
Use the Sleep Timer to turn the System off after a certain
number of minutes when it is playing. By setting the Sleep
Timer, you can fall asleep to music and know that your Sys-
tem will turn off by itself rather than play all night.
You can only set the Sleep Timer when the System is on
and a source is playing.
1Play a CD or tune in to the desired sta-
tion.
2Press the SLEEP button on the Remote
Control.
The “SLEEP” indicator lights up.
When the clock is not set, “CLOCK” and “ADJUST
appear altern atel y o n the d ispla y. Set the c lo ck at first .
3Set the length of time you want the
source to play before shutting off.
Each time you press the SLEEP button, it changes
the number of minutes shown on the display in this
sequence:
10 = 20 = 30 = 60 = 90 = 120 = Cancelled =
(back to the beginning)
The selected number of minutes for the Sleep Timer will
stop blinking five seconds later and the display returns to
the original one before setting the Sleep Timer. (The di splay
is dimmed.)
The System is now set to turn off after the number of min-
utes you set.
To Confirm the Sleep Time:
When the SLEEP button is pressed, the remaining sleep
time is displayed. Wait until the display returns to the ori g-
inal display.
To Cancel the SLEEP Timer Setting:
Press the SLEEP button until the “SLEEP” indicator goes
out on the display.
Turning off the System also cancels the SLEEP Timer.
If you are setting the Daily Timer, the System will be
turned on at the set time to wake you up.
FS-SD550(B).book Page 22 Saturday, January 13, 2001 2:08 PM