JVC G1500 manual Basic Operations, Turning on the Power

Basic Operations

■Projector’s buttons

STAND BY	STAND BY indicator
	OPERATE indicator
OPERATE	OPERATE button
LAMP	2, 1
TEMP
EMERGENCY	MAIN POWER switch
VIDEO	1, 2
COMPUTER
SETTING
+3
QUICK
ALIGN.
-2

■Remote control unit

The following describes the basic procedure for normal use of the projector.

1.Turning on the Power

1 Turn on the MAIN POWER switch.

ON [ ❙ ]:The main power turns on and the STAND BY indicator comes on.

Projector’s indicator

STAND BY

(ON)

2Press the OPERATE button. (Or press the remote control’s OPERATE button for one second or more.)

•The OPERATE indicator comes on.

•About 30 seconds after the MAIN POWER switch is turned on, you can start projecting.

	Projector
Remote control unit
OPERATE	(ON)
or	OPERATE

Notes

•After the power is turned on, the screen may be jumbled for a few seconds, but this is not a malfunction.

•If the light-source lamp does not light up, try to press the OPERATE button again.(Or, press the OPERATE button on the remote control for more than a second.)

■Turning off the Power

1Press the OPERATE button. (Or press the remote control’s OPERATE button for one second

or more.)

OPERATE	COMPUTER	VIDEO
	T
VOL.	ZOOM	FOCUS
	W
PAGE	MENU/ENTER
BACK
PRESET
QUICK		AV
ALIGN.		MUTING

OPERATE button

2, 1

Example of the projector’s button	Projector
(ON)	(Blinking)
\	STAND BY

OPERATE

•The STAND BY indicator changes to blinking, and the projector goes into cool-down mode.

2Turn off the MAIN POWER switch after the STAND BY indicator

changes to steady on.

OFF [à]: The MAIN POWER switch turns off and the STAND BY indicator goes off.

Projector

(OFF)

STAND BY

26

*Do not turn off the MAIN POWER switch during cool down mode (the STAND BY indicator blinking). Turn it off after the STAND BY indicator becomes on (stand- by mode).