Getting Started
1
1Load the battery
1.Slide the latch and open the cover.
2.Insert the battery according to the correct polarity marks (+ or
| 2 | Charge the |
| 1. | A blinking light will indicate active charging. |
| 2. | In adapter charging mode, the full charging time |
| for a depleted battery is about 5 hours and the | |
2 | light will turn off automatically after the charging | |
is completed. | ||
| 3. | In PC USB charging mode, a longer charging |
| time is required. | |
Adapter charging mode PC USB
(Please use JVC charging mode authenticated adapter
Using one with an output higher than 5 V risks breakdown.
3Insert the memory card
1.Slide the latch and open the cover.
2.Insert the SD card (Optional) into the slot until it locks properly.
3.To remove the SD card, press inward to release it and gently pull it out.
How to set the clock
1. Press the MENU button
| 2. Select [Time Setting] and then press | / | |
3 | for Year, Month, Day, Hour, and Minute. |
| |
3. Press [SET | ] to go for next. |
| |
|
| ||
Guide
1.Connect the camera to a computer.
2.Open [WiVideo ] Drive, then double click [Start.pdf]
Note: Adobe Reader must be installed to read PDF
Supported SD card
