JVC GET0191-001A EXTERNAL COMPONENT OPERATIONS

42

ENGLISH

EXTERNAL COMPONENT OPERATIONS

Playing an external component

You can connect the external component to the

CD changer jack on the rear using the Line Input

Adapter KS-U57 (not supplied).

Preparations:

• For connecting the Line Input Adapter KS-U57 and

the external component, refer to the Installation/

Connection Manual (separate volume).

• Before operating the external component using the

following procedure, select the external input

correctly. See “To select the external component to

use—EXT IN” on page 34.

1

Select the external component

(LINE IN).

• If “LINE IN”* does not appear on the display,

see page 34 and select the external input

(“LINE IN”).

*Displayed only when one of the following sources is

selected—FM, AM, and CD.

Note on One-Touch Operation:

When you press CD CD-CH, the power automatically

comes on. You do not have to press to turn

on the power.

2

Turn on the connected component

and start playing the source.

3

Adjust the volume.

4

Adjust the sound as you want. (See

pages 29 and 30.)

CD LINE IN*

EN42-42_KD-SC601[E_EX_EU]f.p65 10/3/03, 12:40 PM42

Contents

Main KD-SC601 CD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVER INSTRUCTIONS BEDIENUNGSANLEITUNG MANUEL DINSTRUCTIONS GEBRUIKSAANWIJZING IMPORTANT FOR LASER PRODUCTS How to reset your unit CONTENTS LOCATION OF THE BUTTONS Control panel Remote controller Preparing the remote controller Installing the battery 1. 2. 3. BASIC OPERATIONS Canceling the display demonstration DEMO OFF DEMO ON Setting the clock RADIO OPERATIONS Listening to the radio Searching for a station automatically: Auto search Start searching for a station. Searching for a station manually: Manual search Storing stations in memory FM station automatic preset: SSM Select the FM band (FM1 3) you want to store FM stations into. Press and hold SSM for about 2 seconds. Tuning in to a preset station Manual preset RDS OPERATIONS What you can do with RDS Tracing the same programme automatically (Network-Tracking Reception) To use Network-Tracking Reception Using TA Standby Reception Using PTY Standby Reception Select PTY STBY (standby) if not shown on the display. Select one of the twenty-nine PTY codes. (See page 19.) Finish the setting. Searching your favorite programme To store your favorite programme types To search your favorite programme type Setting the TA volume level 2 Automatic clock adjustment 2 Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons 2 3 PTY codes Playing a CD Insert a CD into the loading slot. CD OPERATIONS To stop play and eject the CD Locating a track or a particular portion on a CD To go to the next or previous tracks To fast-forward or reverse the track To go to a particular track directly To go to a track quickly (+10 and 10 buttons) Selecting CD playback modes To play back tracks at random (Disc Random Play) Prohibiting disc ejection While pressing CD CD-CH, press and hold for more than 2 seconds. To cancel the prohibition and unlock the disc Playing a CD Text To change the CD Text information manually, select text display mode while playing a CD Text. MP3/WMA INTRODUCTION What are MP3/WMA? ROOT Compatible with ID3 Tag How are MP3/WMA files recorded and played back? MP3/WMA OPERATIONS To stop play and eject the disc To change the display information When TAG DISP is set to TAG OFF When TAG DISP is set to TAG ON (initial setting: see page 34) Locating a file or a particular portion on a disc To fast-forward or reverse the file To skip to the next or previous files Album name / performer (folder name*) Track title (file name*) To go to a particular folder directly To go to a particular file quickly within the current folder (+10 and 10 buttons) Selecting playback modes To play back files at random (Folder Random/Disc Random Play) TRK RPT FLDR RPT Canceled To play back files repeatedly (Track Repeat/Folder Repeat Play) SOUND ADJUSTMENTS Selecting preset sound modes (C-EQ: custom equalizer) CLASSICROCKUSER JAZZ HIP HOP Press M MODE to enter the functions mode. Adjusting the sound Select the item you want to adjust. and Repeat steps * OTHER MAIN FUNCTIONS Preferred Setting Mode (PSM) items * * * To select the display colorCOLOR To select the level meterLEVEL To select the dimmer modeDIMMER To select the telephone mutingTEL To turn on/off the key-touch toneBEEP Assigning names to the source Select a source you want to assign a name to. CD CD-CH Changing the standard plate To erase the input characters How to use the cutout plates 1 2 3 Replace with another plate (a standard, cutout, or downloaded plate) of your preference. Detaching the control panel Detaching the control panel Attaching the control panel CD CHANGER OPERATIONS Playing discs CD CD-CH* Select the CD changer (CD-CH). To go to a particular disc directly To fast-forward or reverse the track/file To skip to the next or previous tracks/files (only for MP3 discs) To show the disc information for CD Text and MP3 discs Select text display mode while playing a CD Text or an MP3 disc. To go to a track/file quickly (+10 and 10 buttons) Selecting the playback modes To play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) DISC RPT MAG RND MAG RNDDISC RND EXTERNAL COMPONENT OPERATIONS Playing an external component DAB TUNER OPERATIONS Tuning in to an ensemble and one of the services Select the DAB tuner. Select the DAB band (DAB1, DAB2, or DAB3). What is DAB system? Storing DAB services in memory Select the DAB tuner. Select the DAB band (DAB1, DAB2, or DAB3) you want. Service name Ensemble name Channel number Frequency Clock Tuning in to a preset DAB service What you can do more with DAB Tracing the same programme automatically (Alternative Reception) To use Alternative Reception 2 3 Page Page About mistracking: MAINTENANCE Handling discs How to handle discs To keep discs clean To play new discs SPECIFICATIONS AUDIO AMPLIFIER SECTION TUNER SECTION CD PLAYER SECTION GENERAL Page KD-SC601 Teileliste fr den Einbau und Anschlu Liste des pices pour linstallation et raccordement Lijst van onderdelen die u bij installatie en aansluiting nodig hebt Parts list for installation and connection 31 2 Par exemple dans une Toyota, retirer dabord lautoradio et installer lappareil la place. RACCORDEMENTS ELECTRIQUES ELEKTRISCHE ANSCHLSSE FEHLERSUCHE EN CAS DE DIFFICULTES Les fils rouge et noir sont-ils racords correctement? Le fil jaune est-elle raccorde? Le fil de sortie denceinte est-il court-circuit? C Vous pouvez connecter un amplificateur ou autre appareil pour amliorer votre systme autoradio. Amplifier / Verstrker / Amplificateur / Versterker Vous pouvez connecter les deux appareils en srie comme montr ci-dessus. Avant de connecter le changeur CD et/ou le tuner DAB, sassurer que lunit est teinte. KD-SC607 INSTRUCTIONS CD RECEIVER - How to use the M MODE button IMPORTANT FOR LASER PRODUCTS How to reset your unit CONTENTS LOCATION OF THE BUTTONS Control panel Remote controller 6 Preparing the remote controller Installing the battery 1. 2. 3. BASIC OPERATIONS Canceling the display demonstration Setting the clock Station name Station frequency Programme typeClock 10 RADIO OPERATIONS Listening to the radio Searching for a station automatically: Auto search Start searching for a station. Searching for a station manually: Manual search Storing stations in memory FM station automatic preset: SSM Select the FM band (FM1 3) you want to store FM stations into. Press and hold SSM for about 2 seconds. Tuning in to a preset station Manual preset RDS OPERATIONS What you can do with RDS Tracing the same programme automatically (Network-Tracking Reception) To use Network-Tracking Reception Using TA Standby Reception 15 Using PTY Standby Reception Select PTY STBY (standby) if not shown on the display. Select one of the twenty-nine PTY codes. (See page 19.) Finish the setting. Searching your favorite programme To store your favorite programme types To search your favorite programme type 18 Setting the TA volume level 2 Automatic clock adjustment Other convenient RDS functions and adjustments Automatic selection of the station when using the number buttons 2 3 PTY codes 20 Playing a CD Insert a CD into the loading slot. CD OPERATIONS To stop play and eject the CD Locating a track or a particular portion on a CD To go to the next or previous tracks To fast-forward or reverse the track To go to a particular track directly To go to a track quickly (+10 and 10 buttons) Selecting CD playback modes To play back tracks at random (Disc Random Play) 23 Prohibiting disc ejection While pressing CD CD-CH, press and hold for more than 2 seconds. To cancel the prohibition and unlock the disc Playing a CD Text To change the CD Text information manually, select text display mode while playing a CD Text. MP3/WMA INTRODUCTION What are MP3/WMA? Compatible with ID3 Tag How are MP3/WMA files recorded and played back? 25 MP3/WMA OPERATIONS 26 To stop play and eject the disc When TAG DISP is set to TAG OFF To change the display information Locating a file or a particular portion on a disc To fast-forward or reverse the file To skip to the next or previous files Album name / performer (folder name*) Track title (file name*) To go to a particular folder directly To go to a particular file quickly within the current folder (+10 and 10 buttons) Selecting playback modes To play back files at random (Folder Random/Disc Random Play) To play back files repeatedly (Track Repeat/Folder Repeat Play) TRK RPT FLDR RPT 29 SOUND ADJUSTMENTS When using the remote controller: JAZZ HIP HOP USER ROCK CLASSIC POPSHIP HOPJAZZ Adjusting the sound (balance) (treble) (bass) (volume) OTHER MAIN FUNCTIONS Preferred Setting Mode (PSM) items 32 * * To select the display colorCOLOR To select the level meterLEVEL To select the dimmer modeDIMMER To select the telephone mutingTEL To select the scroll modeSCROLL Assigning names to the source Select a source you want to assign a name to. CD CD-CH Changing the standard plate To erase the input characters 36 How to use the cutout plates 1 2 3 Replace with another plate (a standard, cutout, or downloaded plate) of your preference. Detaching the control panel Detaching the control panel Attaching the control panel 38 CD CHANGER OPERATIONS CD CD-CH* Playing discs Select the CD changer (CD-CH). To go to a particular disc directly To fast-forward or reverse the track/file To skip to the next or previous tracks/files 40 (only for MP3 discs) To show the disc information for CD Text and MP3 discs Select text display mode while playing a CD Text or an MP3 disc. To go to a track/file quickly (+10 and 10 buttons) Selecting the playback modes To play back tracks/files at random (Folder Random/Disc Random/Magazine Random Play) DISC RPT TRK RPT DISC RPT MAG RNDDISC RND EXTERNAL COMPONENT OPERATIONS Playing an external component Page Page About mistracking: MAINTENANCE Handling discs How to handle discs To keep discs clean To play new discs SPECIFICATIONS AUDIO AMPLIFIER SECTION TUNER SECTION CD PLAYER SECTION GENERAL Page ~ ! @ KD-SC607 Installation/Connection Manual / Parts list for installation and connection INSTALLATION (IN-DASH MOUNTING) ENGLISH 31 2 When installing the unit without using the sleeve / When using the optional stay / ELECTRICAL CONNECTIONS PRECAUTIONS on power supply and speaker connections: B ENGLISH Connections Adding Other Equipment / Amplifier / CD changer / - B