6
To stop searching before a station is
received, press the same button you have
pressed for searching.

Searching for a station manually:

Manual search

1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Press and hold ¢ or 4
until “M” (manual) starts flashing on
the display.
RADIO OPERATIONS

Listening to the radio

You can use either automatic searching or manual
searching to tune in to a particular station.
Note:
When a cassette is in the cassette compartment, you
cannot select the tuner. Be sure to eject the cassette
from the cassette compartment to listen to the radio.

Searching for a station automatically:

Auto search

1
Select the band (FM1 – 3, AM).
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
2
Start searching for a station.
When a station is received, searching stops.
Selected band appears.
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
To search for stations of
higher frequencies
To search for stations of lower frequencies
EN06-09_KS-FX384[UI]f.p65 1/18/05, 9:05 AM6