JVC GET0721-001A, KD-AHD79, KD-HDR70 Troubleshooting, SRC, OFF, OFF, AM*9, SELECT, Symptom, Menu item, Underlined, Remedy/Cause, IPOD SWITCH*8, Selectable setting, [Initial: Underlined]

Menu item

IPOD SWITCH*8

SELECT	*AM9**
SELECT	R-AUX*9
	F-AUX*9
SRC

Selectable setting, [Initial: Underlined]

HEAD MODE : Controls iPod playback through the unit. / IPOD MODE : Controls

iPod playback through the iPod/iPhone. / EXT MODE : The sound of any functions (musics, games, applications, etc.) running on the connected iPod/iPhone is emitted through the speakers connected to this unit. The display always show “EXT MODE.”

ON / OFF : Enable or disable “AM” in source selection.

ON / OFF : Enable or disable “F-AUX” in source selection.

ON / OFF : Enable or disable “R-AUX” in source selection. / BT ADAPTER : Selects if the rear auxiliary input jack is connected to the Bluetooth adapter, KS-BTA100. (page 12) The source name changed to “BT AUDIO.”

*8 Displayed only when “USB-IPOD” is selected as the source.

*9 Displayed only when any source other than “AM/F-AUX/R-AUX/BT AUDIO” is selected separately.

Troubleshooting

General

FM/AM

	Symptom	Remedy/Cause
	Sound cannot be heard from the	Adjust the volume to the optimum level. / Make sure the unit is not
	Sound cannot be heard from the
	speakers.	muted/paused. (page 6) / Check the cords and connections.
	“MISWIRING CHK WIRING THEN RESET	Check to be sure the terminals of the speaker leads are covered
	UNIT” / “WARNING CHK WIRING THEN	with insulating tape properly, then reset the unit. (page 3)
	RESET UNIT” appears on the display and	If the message does not disappear, consult your JVC car audio
	no operations can be done.	dealer or a company supplying kits.
	The unit does not work at all.	Reset the unit. (page 3)
	“F-AUX” or “R-AUX” cannot be selected.	Check the <SRC SELECT> = <F-AUX/ R-AUX> setting. (See
		above.)
	Sound is sometimes interrupted while	Check to be sure the recommended stereo mini plug is used for
	listening to an external component	connection. (page 12)
	connected to the auxiliary input jack.
	The correct characters are not displayed	This unit can only display letters (upper case), numbers, and a
	(e.g. album name).	limited number of symbols.
	SSM automatic presetting does not work.	Store stations manually.
	Static noise while listening to the radio.	Connect the antenna firmly.
	“AM” cannot be selected.	Check the <SRC SELECT> = <AM> setting. (See above.)
	Sound quality changes when receiving	Fix the reception mode either to < ANALOG / DIGITAL>. (page 8)
	HD Radio stations.

Continued...

ENGLISH 19