JVC GGT0356-001A-H Using the TV’s Menu --- Area, Useful functions continued, Viewing Teletext

	Using the TV’s Menu ---> Area - 2
	Picture Mode	Select the picture as you like. (Standard / Soft / Bright)
Picture	Backlight	Darker <--> Brighter
	Picture	Lower <--> Higher
	Brightness	Darker <--> Brighter
	Detail	Softer <--> Sharper
	Color	Lighter <--> Deeper
	Tint	Reddish <--> Greenish *Only NTSC
	White Balance	Select the white balance of the picture. (Cool / Mid / Warm)
	Features	Finer picture adjustment
	Clear SD	For clearly picture (Off / Mode-1 / Mode-2)

	On Timer	Turns on the TV from standby mode.
Features		CH	Select a channel. (Air : CH02 - CH69 ,
			Cable : CC01 - CC125)
	Sleep Timer	On Timer Set a time. (00:00 - 12:00)
		Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
	Channel Guard	Stop children from watching specific channels.
	Blue Back	Display a blue screen and mute the sound when the
	Child Lock	signal is weak or absent. (Off / On)
		Disables the side control buttons of the TV. (Off / On)
	Auto Shutoff	Set the power to turn off if no TV signal (RF) is
		received and no operation is performed for about 15

Useful functions (continued)

Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.

Off	: Deactivates the function
Eco-1	: Picture is darkened for the 1st level.
Eco-2	: Picture is darkened for the 2nd level (more than the 1st level).

Max-Eco :Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house works at the same time).

-After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.

-When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.

-After unplugging the TV or press “Power off” button, this function will be reset back to “Off”

Technical information

Sound and Color system in your country or region

Area	Country or Region	System System
	Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
	Yemen, Indonesia, Malaysia, Singapore, Thailand,	B/G
Asia,	India, etc.		PAL
Middle	China, Vietnam, etc.	D/K
East	Hong Kong, etc.	I
	Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.	B/G	SECAM
	Philippines, Taiwan, Myanmar, etc.	M	NTSC

What is “Clear SD”

LCD picture is unstable due to a large number of signal noise. Such noise appears extensively especially when an LCD displays SD signals. Clear SD mode resolves disadvantage for better picture quality.

	Digital VNR		Reduces the amount of noise in original
	Color Management		picture. (Off / On)
			For natural - looking pictures. (Off / On)
	Picture Management		Fix bright / dark pictures. (Off / On)
	Dynamic Backlight		Reduces the brightness of the backlight
	Color System		when the screen is dark. (Off / On)
			Select an appropriate color system.
	Zoom		(Auto / NTSC 3.58 / PAL-M / PAL-N)
			Change the aspect ratio.
			(Auto / Regular / Panoramic /14:9 Zoom /
			16:9 Zoom / 16:9 Zoom Subtitle / Full)
	MTS	Select the stereo and SAP broadcasted programs.
		(Stereo / SAP / Mono)
Sound
	Sound Meister Set sound theme to match your listening source.
	Bass	(Off / Dynamic / Pure / Living)
			Compensates low frequencies to widen the
	Treble		frequency band. (Weaker <--> Stronger)
			Compensates high frequencies to widen the
	Surround		frequency band. (Weaker <--> Stronger)
			Expands the stereo sound naturally.
	Balance		(Narrower <--> Wider)
		Left Stronger <--> Right Stronger
	Voice Enhancer	Uses sound enhancement technology. (Off / On)
	Al Volume	Prevent sudden increase or decrease of sound. (Off / On)
	Subwoofer Out Chooses to connect subwoofer. (Off / On)
	Subwoofer Level Adjusts sound level of your subwoofer.
		(Lower <--> Louder)
		• When Subwoofer Out set to On, you can adjust
	Karaoke	Subwoofer Level.
		You can enjoy to reduce the vocals for your own karaoke.

minutes. (Off / On)

Favorite Setting Delete the favorite channel that you registered by (Blue) .

Power Lamp Sets power lamp lighting while the TV is on. (Off / On)

Eco Mode Adjust picture contrast to match your room brightness. (Off / Eco-1 / Eco-2 / Max-Eco)

	Auto Program	Automatically registers channels.
Up	Channel	Skip	Skip the channel by (Red) .
	Summary	Cancel	Cancel the skip channel by (Green).
Set		ID	Edit a channel name by (Yellow).
		• Channels are to be skipped cannot be selected by
		the CHANNEL - / + button.
		• The skip can be set to all channels of Air (CH02 -

CH69) and Cable (CC01 - CC125).

Language Select your desired on screen display language. Video-2 Setting Switch between video and component signal.

(Video / Component)

Rocket Start TV can turn on quickly. (Off / On)

•When Rocket Start is On, power consumption at standby mode will more than normal standby mode.

Closed Caption Select the desired caption or text channel.

Closed	Select to view close caption or text
Caption	information. (Off / CC / Text)
Caption	Select the desired caption.
Text	(CC1 / CC2 / CC3 / CC4)
	Select the desired text channel.

(T1 / T2 / T3 / T4)

•Closed Caption is not available for component signal.

Viewing Teletext

You can watch the Teletext broadcast channel with Text Functions.

1 TV mode <--> TEXT mode

2 Select a Teletext page by press number button (0-9).

•Move up or down a page by CHANNEL +/-.

List Mode : Book mark your favorite page.

MODE	(Red) (Green) (Yellow) (Blue)	for select to save
	Press number button
	for enter the number	save
	of page.

	• Recall your favorite page by press the color button.
Hold	: Hold the current page.
	• Cancel by press this button again.
Reveal	: Display hidden information.
	• Example : answer to a quiz, etc
Size	: Double the size of the displayed text.
Index	: Returns to page “100” or a previously designated page.
Cancel	: Leave the current page open, while you switch to watch TV.
	• Useful when running a page search.
Sub-page	: Display the number of Sub-page.
	• Cancel by press this button again.

Watching Video or DVDs

1 Select the input source.

		AV Select		1.	Select
466)	$%/	0	01
		1	Video-1
				OK
		2	Video-2
		3	HDMI	2.	Set
		4	PC

•Operate the connected device and play video.

2 Select “Set Up” Menu.

HDMI setting	: Setting for HDMI input.
Size	: Auto / 1 / 2
	If wrong screen size appears in 480p (525p),
	change to “1” or “2”.
Audio	: Auto / Digital / Analogue
	If no sound, change to “ Analogue “ or “ Digital”.
PC Setting	: Setting for PC input.
Auto	: Automatic adjust by 2.
PC Position	: Adjust screen position by 3 / 4.
	And set by OK .
Phase	: Sets the focus of screen.
Pixel	: Adjusts the horizontal feature of screen.

	Russia, etc.	D/K	SECAM
Europe	Czech Republic, Poland, etc.
	Germany, Holland, Belgium, etc.	B/G	PAL
	UK, etc.	I
Oceania	Australia, New Zealand, etc.	B/G	PAL
	Republic of South Africa, etc.	I	PAL
Africa	Nigeria, etc.	B/G
	Egypt, Morocco, etc.		SECAM
	Agentina, Paraguay, Uruguay	N	PAL
South	Brazil	M
America	Chile, Peru, Bolivia, Colombia, Venezuela,	M	NTSC
	Ecuador, etc.

PC Signals that can be displayed

•If the signal doesn’t appear, check that the vertical frequency on the PC is set to “60Hz”.

Resolution	640 x 480 (VGA) / 1024 x 768 (XGA)
Vertical frequency	60.0

*Machintosh* computers are not supported.

(Machintosh is a registered trademark of Apple Computer, Inc.)

No use “Clear SD” Use “Clear SD”

Connect “DVI” devices

Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable. Connect analogue sound output of the DVI device to L and R terminals in INPUT VIDEO-2.

• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.

	Language group for Teletext
Group	Languages
Group-1	Turkish, Hungarian, English, German, French, Italian, Spanish,
	Portuguese, Greek, Swedish, Finnish
Group-2	Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
	German, French
Group-3	Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
	Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Group-4	Arabic, Hungarian, English, German, French, Italian, Spanish,
	Portuguese, Swedish, Finnish
Group-5	Farsi, Hungarian, English, German, French, Italian, Swedish,
	Finnish

•If the characters are unreadable. ➡ Select different Teletext language group.

Karaoke	Chooses to reduce the vocals.
Main Volume	(Off / Mode-1 / Mode-2)
	Adjusts volume level. (Lower <--> Louder)
Microphone Volume	Adjusts volume level of microphone.
	(Lower <--> Louder)

HDMI Setting Setting for HDMI input. (Size / Audio)

PC Setting Setting for PC input.

(Auto / PC Position / Phase / Pixel)

* Please see CH/CC List in GGT0356-001A-H.

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Specification

Main unit

Terminals / Connectors

Useful functions

Channel Guard : Stop children from watching specific channels. 1 Select “Channel Guard”

			1.	Select a number
0	Features
	> Set ID No.	OK	2.	To the next column
	0	0 0 0	3.	Set

2 Select a channel and lock it ( : locked)

				1. Select a	Lock / Release
	Features				(Blue)
>> Channel Guard				channel
		CH / CC
PR	ID			OK
01	SAT	CH	02
02	– – – – – –	CH	05
03	BBC	CH	47
04	IEEE	CH	09
05	APL	CH	11
06	DANY	CH	07
07
08
09
10

•View a locked channel by use the numerical buttons to enter the channel

number. When appeare, press “Display” button and enter your “ID No.”

Subwoofer out : You can enjoy subwoofer sound from Subwoofer out.

1 Select “Subwoofer Out”

Sound 1. Select

Stereo / I II	I II	Mono
Sound Meister		OK	2. Adjust
Balance
Voice Enhancer	Off		3. Finish
AI Volume	Off
Subwoofer Out	On
Subwoofer Level
Karaoke

Chooses to connect subwoofer. (Off / On)

•When Subwoofer Out set to On, you can adjust Subwoofer Level.

•Subwoofer to be used must have a built-in amplifier.

Karaoke : You can enjoy to reduce the vocals for your own karaoke.

1Select “Karaoke”

Sound			1.	Select
Karaoke		OK	2.	Adjust
Karaoke	Off
			3.	Finish
Main Volume
Microphone Volume
Karaoke	Chooses to reduce the vocals.
	Off	: Normal sound of song
	Mode-1	: Only sound of music
	Mode-2	: To sing, accompanying with sound of song

•Karaoke function works only for stereo sound system.

•If using Karaoke disc, users must choose to remove the vocals from the player.

Main Volume Adjusts volume level. (Lower <---> Louder) Microphone Volume Adjusts volume level of microphone.

(Lower <---> Louder)

•Microphone Volume is available when plug in microphone.

•Microphone to be used with the “Karaoke” function of JVC must be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type; otherwise, noise will result.

Freeze : Take snapshots of the screen.

1 OK Cancel

	Press “ OK ” again,
Freeze	or change the
	channel.
still picture

•You cannot save or export the snapshot.

•Freeze function is not available for HDMI, PC and Component signal.

4

Severe noise or snow

Check the aerial cable and TV connections .

Check the direction of the aerial.

Check the aerial or its cable damaged or not.

Patterns, stripes or noise

Interference caused by devices such as an amplifier, personal computer, or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal reflection from mountains or building. Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly.

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries.

Ensure that you are operation the remote control at less than 7 meters from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again.

Side control buttons do not work

Switch “Child Lock” to “Off”.

Aspect ratio changed unintentionally

Press “ ZOOM ” button to return to your settings.

PC screen alignment is off

Adjust the “PC Position” in “PC Setting” of Set Up menu.

Blue screen appears on the screen

Switch “Blue Back” to “Off”.

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself. If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Poor picture quality

Unnatural color >> Adjust “Color” and “Backlight”.

Check “Color System”. If “Auto” is selected. Select the specific color system manually.

Poor sound

Adjust the “Bass” and “Treble”.

If receiving a poor signal in “Stereo/I■II” switch to “Mono”. Adjust the channel reception using “Manual”.

For HDMI signal, wrong screen size.

Switch “Size” in “HDMI Setting” to “1” or “2”.

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for an “HDMI” device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo. Check if the device is compliant with HDMI.

Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or “Analogue” or “Auto” for DVI devices.

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use fine dots (“pixels”) to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUTPUT terminal.

Subwoofer, No sound

May be signal source is not low frequency bass signal.

Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers.

Echo

Lower the sound level in “Microphone Volume” in order to prevent the echo.

5

Broadcasting systems	Area-1	B / G / I / D / K / M / N
	Area-2	M / N
	Area-1	PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
Color systems		PAL-M / PAL-N
	Area-2	NTSC 3.58 / PAL-M / PAL-N
		VHF low channel (VL) = 46.25 to 140.25 MHz
	Area-1	VHF high channel (VH) = 147.25 to 423.25 MHz
Channels and		UHF channel (U) = 431.25 to 863.25 MHz
		VHF low channel (VL) = 55.25 to 127.25 MHz
frequencies	Area-2	VHF high channel (VH) = 133.25 to 361.25 MHz
		UHF channel (U) = 367.25 to 801.25 MHz
	Receives	cable channels in mid band (X to Z+2, S1 to S10),
	super band (S11 to S20) and hyper band (S21 to S41)
Sound-multiplex	NICAM (I / B / G / D / K ), A2 (B / G / D / K)
systems	MTS (Multi-channel Television Sound)
Teletext systems	FLOF (Fastext), WST (World System Teletext)
Power requirements	AC 110 V - 240 V, 50/60Hz
Audio output		6 W + 6 W
(Rated power output)
Speakers		(4 cm x 16 cm) x 2
Power consumption		105 W
[standby]
		[0.7 W]
[“Rocket Start” mode
		[16 W]
standby]
Screen size
(visible area size		80 cm
measured diagonally)
Dimensions		791.8 x 571.7 x 203.5
(W x H x D: mm)
		[791.8 x 520.5 x 103.9]
[without stand]
Weights		15 kg
[without stand]		[12 kg]
	Power cord x 1
	Remote control unit : RM-C2022 x 1
Accessories	AAA/R03 dry cell battery x 2
	Screw x 8
	Matching box x 1

Terminal name		Terminal type	Signal type (IN)
	VIDEO-1	RCA connectors x 3	Composite video, Audio L/R
		RCA connectors x 5	Composite video, Analogue
			component 480i (525i) / 576i (625i),
			Progressive : 480p (525p) / 576p
	VIDEO-2		(625p),
			HD : 720p (750p) / 1080i (1125i) /
			1080p (1125p)
			Audio L/R
Input		HDMI connector x 1	HDMI 480i (525i) / 480p (525p) /
	HDMI		576i (625i) / 576p (625p) / 720p
terminals
			(750p) / 1080i (1125i) / 1080p
			(1125p)
	PC INPUT	D-SUB (15 pins) x 1	Analogue PC signal
	HDMI Analog /
	DVI Analog / PC	RCA connectors x 2	Audio L / R
	Audio
		mini-jack x 1
	Microphone	(3.5 mm in	Microphone input
		diameter)

•HDMI Analog / DVI Analog / PC Audio use terminal common with VIDEO-2.

•We may change the design and specifications without notice.

•HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

6