|
| EN 39 | |
SYMPTOM |
| POSSIBLE CAUSE(S) |
|
OTHER |
|
|
|
The tape won’t eject. |
| ● The battery pack is running low. | |
|
|
|
|
Some functions are not available. |
| ● The PROGRAM AE select dial is set to “AUTO LOCK”. |
|
Vertical white lines appear when |
| ● This sometimes occurs when the contrast between the | |
shooting a very bright object. |
| background and the object is great. It is not a defect of | |
|
| the camcorder. |
|
Bright, |
| ● Sunlight is directly entering the lens. | |
in the viewfinder. |
|
|
|
An error number (i.e. E03) appears in the viewfinder.
●Turn the camcorder’s power off, then disconnect the power source. After a few minutes, try turning the power on again. If the error number still appears in the view- finder, consult your nearest JVC dealer.
The image is out of focus.
●The diopter needs to be adjusted (☞ pg. 6).
●The scene being shot is adversely affecting the operation of Auto Focus (☞ pg. 16).
A character generator title and the date and time displays disappear from the viewfinder.
●If you remove the power source from the camcorder while the power is on, all settings and selections are erased. Make sure to turn the camcorder’s power off before disconnecting the power source.
Even though the Lens Cover is open, the Lens Cover Warning indicator blinks.
●The Lens Cover Warning indicator may blink when the camcorder is used in dark areas, regardless of the position of the Lens Cover.
The camcorder is a
