JVC GR-AX430, GR-AX730 manual EN Playback Using The Cassette Adapter, Cassette Adapter VHS Playpak

34ENPLAYBACKUsingTheCassetteAdapter

Cassette Adapter (VHS Playpak)

Use this to play back a VHS-C video cassette recorded with this camcorder. It is fully compatible with any VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.

VCR

Compartment door

Sliding latch

Compact video cassette

INSERT BATTERY

1 Slide the battery cover up to remove it, and install one “AA(R6)” size battery as shown in the illustra- tion at left. Then reattach the cover.

INSERT CASSETTE IN ADAPTER

2 Slide the latch to open the adapter compartment door, then insert the cassette and close the compart- ment door.

PLAY BACK ON CONNECTED VCR

3 Load the cassette adapter into the VCR and play the tape back as you would any other.

REMOVE CASSETTE FROM

ADAPTER

4 Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then insert your finger in the hole on the underside of the adapter as shown in the illustration at left, push up and remove the cassette.

NOTES:

●For GR-AX730: “AA(R6)” size battery is supplied with

Reels	the provided Cassette Adapter.
	For GR-AX430/230: “AA(R6)” size battery is NOT
	supplied with the provided Cassette Adapter. Separate
	purchase necessary.
	● During tape loading and unloading, do not touch the
	reels for safety and tape protection.

●During special-effect playback (slow motion, still

Recording safety hole	frame, etc.), the picture may vibrate or noise bars may
	appear on the screen.

●To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with adhesive tape.