JVC GR-AX910, GR-AX810 START/STOP Viss, RM-V700U optional, Retake Feature, Index Code Marking

18

RECORDING BasicFeatures(cont.)

START/STOP

VISS

RM-V700U (optional)

RETAKE

FEATURE:	Index Code Marking
PURPOSE:	To give you automatic access to any
	selected point on a recording. Auto
	Marking and Manual Marking are
	available.
OPERATION:	Auto Marking
	An index code is marked to start the
	first recording after a cassette is
	inserted, as long as the Power switch
	is set to “CAMERA”.
	Manual Marking
	1) Press VISS once to place the index
	code. INDEX blinks in the
	viewfinder during marking.
NOTE:	If VISS is pressed during
	Record–Standby mode, the mark is
	placed where RECORDING
	START/STOP is pressed.
FEATURE:	Retake
PURPOSE:	To re-record certain segments.
OPERATION:	1) Make sure the camcorder is in the
	Record–Standby mode.
	2) Press either RETAKE button to
	reach the start point for new
	recording.
	3) Press RECORDING START/STOP
	to start recording.
NOTE:	Noise may appear during Retake.
	This is normal.