20EN

RECORDING

BasicFeatures(cont.)

DATE/TIME

Display

Select Dial

Date display

Time display

Date/Time display

Auto Date Record mode

Date-off mode (No display)

Date display

 

Auto Date Record mode

DEC 25.98

 

AUTO DATE

 

 

 

Auto date record mode

FEATURE:

PURPOSE:

OPERATION:

NOTES:

Date/Time Insert

To display the date and time in the viewfinder or on a connected color monitor, as well as to record them manually or automatically.

1)Turn the Select Dial to any position except AUTO LOCK.

2)Choose a display mode by pressing DATE/TIME repeatedly while in Record-Standby to cycle through the modes as shown in the illustration at left.

You should have already

performed the Date/Time Setting procedure (pg. 11). If you haven’t, do so first.

DISPLAY

The selected display can be recorded.

If you don’t want to record the display, select the Date-off mode before shooting.

If you want to delete the display during shooting, press DATE/TIME.

To recall the display, engage the Record-Standby mode and press DATE/TIME repeatedly until the desired display appears.

AUTO DATE RECORD

Your camcorder automatically records the date for about 5 seconds after recording is initiated in the following situations:

After changing the date.

After loading a cassette.

After Auto Date Record mode is selected by pressing DATE/TIME.

Time display

PM10:50:00

Date/Time display

DEC 25.98

Auto date record executed

In this mode, the date is replaced after 5 seconds with “AUTO DATE” but this is not recorded.

Setting the Select Dial to AUTO LOCK always engages the Auto Date Record mode, and disables all other modes.

DEC 25.98 PM10:50:00

Page 20
Image 20
JVC GR-AX930U manual Basic Features, Display Select Dial, Feature Purpose Operation, Date/Time Insert