12 EN
MENU Wheel
Power Switch
Display
TAPE LENGTH | TAPE LENGTH | ||
T 2 0 | Menu | ||
|
| ||
T 3 0 |
|
| |
T 3 5 |
|
| |
T 4 0 |
|
| |
EX I T |
|
| |
T 3 0 |
|
| Tape length |
|
| ||
|
|
| indicator |
GETTING STARTED (cont.)
Tape Length SettingSet the tape length according to the length of the tape used.1 Set the Power Switch to “
”. The power lamp comes on.
2 Press the MENU Wheel in. The Menu Screen appears.
3 Rotate the MENU Wheel to select “
TO SYSTEM MENU” and press it to display SYSTEM MENU.
4 Rotate the MENU Wheel to select “TAPE LENGTH”, then press it. The TAPE LENGTH Menu appears.
5 Rotate the MENU Wheel to select the correct tape length setting.•T20=20 minutes•T30=30 minutes•T35=35 minutes•T40=40 minutes (in SP)6 Press the MENU Wheel in. The Menu Screen reappears with the highlight bar on “
RETURN”. Press the MENU Wheel in to close the Menu Screen.
NOTE:
The tape remaining time ( pg. 14) is correct only if the correct tape length has been selected.