22 EN VIDEO PLAYBACK

Playback Using The Remote

The following buttons are available only when

the camcorder’s Power Switch is set to “PLAY”.

Control

B PAUSE Button

 

 

● Pauses the tape ( pg. 23)

The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. ( pg. 23)

Installing The Battery

Up Button ( pg. 23)

C SLOW Rewind Button ( pg. 23) D REW Button

●Rewind/Reverse Shuttle Search on a tape ( pg. 20)

Left Button ( pg. 23)

E INSERT Button ( pg. 40)

F SHIFT Button ( pg. 23)

The remote control uses one lithium battery (CR2025).

1 Pull out the battery holder by pushing the lock tab.

2 Insert the battery in the holder, and be sure to have the “+” mark visible.

2

1

13

Lock tab

G DISPLAY Button ( pg. 21, 37) H SLOW Forward Button ( pg. 23) I PLAY Button

●Starts Playback of a tape ( pg. 20)

J FF Button

●Forward/Forward Shuttle Search on a tape ( pg. 20)

Right Button ( pg. 23)

K A. DUB Button ( pg. 40)

L STOP Button

3 Slide the holder back in until you hear a click.

Beam Effective Area (indoor use)

When using the remote control, be sure to point it at the remote sensor. The transmitted beam’s approximate effective distance for indoor use is

5 m.

Remote sensor

NOTE:

The transmitted beam may not be effective or may cause incorrect operation when the remote sensor is directly exposed to sunlight or powerful lighting.

Buttons And Functions

●Stops the tape ( pg. 20)

Down Button ( pg. 23)

M EFFECT Button ( pg. 23)

N EFFECT ON/OFF Button ( pg. 23)

The following buttons are available when the camcorder’s Power Switch is set to “A” or “M”. o Zoom (T/W) Buttons

Zoom in/out ( pg. 18, 23)

(Also available with the Power Switch set to “PLAY”)

p START/STOP Button

Functions the same as the Recording Start/ Stop Button on the camcorder.

q S.SHOT Button

Functions the same as SNAPSHOT on the camcorder.

(Also available with the Power Switch set to “PLAY”)

A Infrared beam transmitting window

●Transmits the beam signal.