MENUS FOR DETAILED ADJUSTMENT

EN 33

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM

 

5S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[OFF]: Disables 5-Second Recording.

 

The “s SYSTEM” functions which are set when

5S: Enables 5-Second Recording. ( pg. 37)

 

the Power Switch is set to “M” are also applied

Anim.: Allows you to record a few frames only.

 

when the Power Switch is set to “PLAY”.

By using an inanimate object and changing its

 

[ ] = Factory-preset

position between shots, you can record the

 

 

 

 

 

 

 

subject as though it is moving.

 

BEEP

 

 

 

 

 

 

 

 

 

 

 

OFF: Even though not heard while shooting,

TELE MACRO

 

 

 

 

 

 

shutter sound is recorded on the tape.

[OFF]: Disables the function.

 

 

 

 

BEEP: The beep sounds when the power is

ON: When the distance to the subject is less

 

turned on or off, and at the beginning and end of

than 1 m (3.3 ft), set “TELE MACRO” to “ON”.

 

recording. It also activates the shutter sound

You can shoot a subject as large as possible at a

 

effect. ( pg. 25, 38)

distance of approx. 40 cm (1.4 ft).

 

[MELODY]: Instead of a beep, a melody sounds

NOTE:

 

 

when any operation is performed. It also

 

 

activates the shutter sound effect.

Depending on the zoom position, the lens may go out

 

 

( pg. 25, 38)

of focus.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE

 

WIDE MODE

 

 

 

[OFF]: Records with no change in the screen

 

OFF: Disables the remote control operations.

 

[ON]: Enables the remote control operations.

ratio. For playback on a TV with a normal screen

 

 

For GR-D270 owners: It is recommended that

ratio.

 

 

 

 

 

 

 

 

 

 

 

 

this function be set to “OFF” to prevent improper

CINEMA* : Inserts black bands at the top and

 

 

operation.

bottom of the screen. The

indicator appears.

 

 

 

 

 

 

 

 

During playback on wide-screen TVs, the black

 

 

 

 

 

 

 

 

DEMO MODE

 

 

 

bands at the top and bottom of the screen are

 

 

 

OFF: Automatic demonstration will not take

cut and the screen ratio becomes 16:9. When

 

using this mode, refer to your wide-screen TV’s

 

place.

instruction manual. During playback/recording

 

[ON]: Demonstrates certain functions such as

on 4:3 TVs/LCD monitor/viewfinder, black bands

 

Program AE with special effects, etc., and can

are inserted at the top and bottom of the screen

 

be used to confirm how these functions operate.

and the image appears like a letter boxed 16:9

 

Demonstration starts in the following cases:

movie.

 

 

 

 

 

 

● When the Menu Screen is closed after “DEMO

SQUEEZE*

 

: For playback on TVs with an

 

MODE” is turned “ON”.

 

 

aspect ratio of 16:9. Naturally expands the

 

● With “DEMO MODE” set to “ON”, if there is no

 

operation for about 3 minutes after the Power

image to fit the screen without distortion. The

 

 

Switch is set to “A” or “M”.

 

indicator appears. When using this mode,

 

 

 

● Performing any operation during the

refer to your wide-screen TV’s instruction

 

 

demonstration stops the demonstration

manual. During playback/recording on 4:3 TVs/

 

 

temporarily. If no operation is performed for more

LCD monitor/viewfinder, the image is elongated

 

 

than 3 minutes after that, the demonstration will

vertically.

 

 

 

 

resume.

* Available only when the VIDEO/MEMORY Switch

 

 

NOTES:

is set to “VIDEO”.

 

 

 

 

 

 

 

 

 

 

● If a cassette is in the camcorder, the

WIND CUT

 

 

 

demonstration cannot be turned on.

[OFF]: Disengages the function.

 

● “DEMO MODE” remains “ON” even if the

 

camcorder power is turned off.

ON

: Helps cut down on noise created by

 

 

● If “DEMO MODE” remains “ON”, some functions

wind. The “ ” indicator appears. The quality of

 

 

 

 

 

 

 

 

 

will not be available. After viewing demo, set to

the sound will change. This is normal.

“OFF”.