MENUS FOR DETAILED ADJUSTMENT

EN 33

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM

 

5S

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[OFF]: Disables 5-Second Recording.

 

The “s SYSTEM” functions which are set when

5S: Enables 5-Second Recording. ( pg. 37)

 

the Power Switch is set to “M” are also applied

Anim.: Allows you to record a few frames only.

 

when the Power Switch is set to “PLAY”.

By using an inanimate object and changing its

 

[ ] = Factory-preset

position between shots, you can record the

 

 

 

 

 

 

 

subject as though it is moving.

 

BEEP

 

 

 

 

 

 

 

 

 

 

 

OFF: Even though not heard while shooting,

TELE MACRO

 

 

 

 

 

 

shutter sound is recorded on the tape.

[OFF]: Disables the function.

 

 

 

 

BEEP: The beep sounds when the power is

ON: When the distance to the subject is less

 

turned on or off, and at the beginning and end of

than 1 m (3.3 ft), set “TELE MACRO” to “ON”.

 

recording. It also activates the shutter sound

You can shoot a subject as large as possible at a

 

effect. ( pg. 25, 38)

distance of approx. 40 cm (1.4 ft).

 

[MELODY]: Instead of a beep, a melody sounds

NOTE:

 

 

when any operation is performed. It also

 

 

activates the shutter sound effect.

Depending on the zoom position, the lens may go out

 

 

( pg. 25, 38)

of focus.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REMOTE

 

WIDE MODE

 

 

 

[OFF]: Records with no change in the screen

 

OFF: Disables the remote control operations.

 

[ON]: Enables the remote control operations.

ratio. For playback on a TV with a normal screen

 

 

 

 

 

 

 

 

ratio.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DEMO MODE

 

 

 

CINEMA* : Inserts black bands at the top and

 

 

bottom of the screen. The

indicator appears.

 

OFF: Automatic demonstration will not take

During playback on wide-screen TVs, the black

 

place.

bands at the top and bottom of the screen are

 

[ON]: Demonstrates certain functions such as

cut and the screen ratio becomes 16:9. When

 

Program AE with special effects, etc., and can

using this mode, refer to your wide-screen TV’s

 

be used to confirm how these functions operate.

instruction manual. During playback/recording

 

Demonstration starts in the following cases:

on 4:3 TVs/LCD monitor/viewfinder, black bands

 

● When the Menu Screen is closed after “DEMO

are inserted at the top and bottom of the screen

 

MODE” is turned “ON”.

and the image appears like a letter boxed 16:9

 

● With “DEMO MODE” set to “ON”, if there is no

movie.

 

 

 

 

 

 

operation for about 3 minutes after the Power

SQUEEZE*

 

: For playback on TVs with an

 

Switch is set to “A” or “M”.

 

 

aspect ratio of 16:9. Naturally expands the

 

● Performing any operation during the

image to fit the screen without distortion. The

 

demonstration stops the demonstration

 

temporarily. If no operation is performed for more

 

indicator appears. When using this mode,

 

refer to your wide-screen TV’s instruction

 

than 3 minutes after that, the demonstration will

 

resume.

manual. During playback/recording on 4:3 TVs/

 

 

NOTES:

LCD monitor/viewfinder, the image is elongated

 

vertically.

 

 

● If a cassette is in the camcorder, the

* Available only when the VIDEO/MEMORY Switch

 

demonstration cannot be turned on.

is set to “VIDEO”.

 

 

● “DEMO MODE” remains “ON” even if the

 

 

 

 

 

 

 

 

camcorder power is turned off.

WIND CUT

 

 

 

● If “DEMO MODE” remains “ON”, some functions

[OFF]: Disengages the function.

 

will not be available. After viewing demo, set to

 

“OFF”.

ON

: Helps cut down on noise created by

 

 

 

 

 

 

 

 

wind. The “ ” indicator appears. The quality of the sound will change. This is normal.