Dubbing To A VCR | To use this camcorder as a player | |
1 Following the illustrations, connect the camcorder and | ||
| ||
| the VCR. Also refer to page 13. | |
| 2 Set the camcorder’s Power Switch to “PLAY” while | |
| pressing down the Lock Button located on the switch. |
3 Turn on the VCR’s power.
4
5
6
● Refer to the instruction manual for the VCR.
7 Press 4/9 on the camcorder to start playback of the source tape.
To AV |
| To S | 8 At the point you want to start dubbing, engage the |
| VCR’s Record mode. | ||
|
|
|
Audio/Video | |
cable | (optional) |
(provided) |
|
1 
2 
3 
4
Cable Adapter*
“Y/C”/“CVBS” Video
Out Select Switch
To TV or VCR
TV
VCR
9 To pause dubbing, engage the VCR’s
10 Repeat steps 7 – 9 for additional editing. Stop the VCR and camcorder.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 7)
●As the camcorder starts to play your footage, it will appear on your TV. This will confirm the connections and the AUX channel for dubbing purposes.
●Before you start dubbing, make sure that the indications do not appear on the connected TV. If they do, they are being recorded onto the new tape.
To choose whether or not the following displays appear on the connected TV
•Date/time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. ( pg. 14, 17)
•Time code
Set “TIME CODE” to “OFF” or “ON”. ( pg. 14, 17)
•Indications other than date/time and time code Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”. ( pg. 14, 17)
A White to AUDIO L IN
B Red to AUDIO R IN
C Yellow to VIDEO IN
DTo
*If your VCR has a SCART connector, use the provided cable adapter.
**Connect when your TV/VCR has an
NOTE:
Set the video out select switch of the cable adapter as required:
Y/C: When connecting to a TV or VCR which accepts Y/ C signals and uses an
CVBS: When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.