16 EN GETTING STARTED |
|
|
Viewfinder Adjustment | Brightness Adjustment Of The | |
1 Set the Power Switch to “REC” while pressing | Display |
|
down the Lock Button located on the switch. | 1 Set the Power Switch |
|
2 Make sure the LCD monitor is closed and |
| |
to “REC” or “PLAY” while |
| |
locked. Pull out the viewfinder fully and adjust it | pressing down the Lock |
|
manually for best viewability. | Button located on the |
|
3 Turn the Dioptre Adjustment Control until the | switch. |
|
indications in the viewfinder are clearly focused. | 2 Open the LCD monitor |
|
Example: | fully. ( pg. 18) |
|
| ● To adjust the brightness of |
|
| the viewfinder, pull out the |
|
| viewfinder fully and set |
|
| “PRIORITY” to “FINDER” | MENU |
| ( pg. 23, 25). |
|
Dioptre Adjustment Control
CAUTION:
When retracting the viewfinder, take care not to pinch your fingers.
3 Press MENU. The | BRIGHT |
Menu Screen appears.
If you are in Playback mode, please proceed to step 5.
4 Press 
or 
to select “DISPLAY”, and press SET or 
. The DISPLAY Menu appears.
5 Press 
or 
to select “BRIGHT”, and press SET or 
. The Menu Screen closes and the brightness control MENU appears.
6 Press 
or 
until the appropriate brightness is reached and press SET or 
.
7 Press MENU. The Menu screen closes.
Tripod Mounting
To attach the camcorder to a tripod, align the direction stud and screw to the mounting socket and stud hole on the camcorder. Then tighten the screw clockwise.
●Some tripods are not equipped with studs.
