EDITING EN 43
Dubbing To Or From A Video Unit

NOTES:

 

 

Equipped With A DV Connector

● It is recommended to use the AC Adapter as

the power supply instead of the battery pack.

(Digital Dubbing)

 

( pg. 15)

 

 

 

● If a blank portion or disturbed image is played

It is also possible to copy recorded scenes from

back on the player during dubbing, the dubbing

may stop so that an unusual image is not dubbed.

the camcorder onto another video unit equipped

● Even though the DV cable is connected correctly,

with a DV connector. Since a digital signal is

sometimes the image may not appear in step 4. If

sent, there is little, if any, image or sound

this occurs, turn off the power and make

deterioration.

 

connections again.

 

 

 

● If “Playback Zoom” ( pg. 26) or “Playback

 

 

Special Effects” ( pg. 26) is attempted or

 

 

SNAPSHOT is pressed during playback, only the

 

 

original playback image recorded on the tape is

 

 

output from the DV IN*/OUT connector.

 

 

● When using a DV cable, be sure to use the

 

 

optional JVC VC-VDV204U or VC-VDV206U DV

 

 

cable.

 

 

 

To DV IN*/OUT

* GR-D650E only

 

 

 

To use this camcorder as a recorder

 

 

 

 

(GR-D650E only)

 

 

 

 

1 Make sure all units are turned off.

 

 

2 Connect this camcorder to a video unit

 

 

equipped with a DV output connector using a DV

Core filter

DV cable (optional)

cable as shown in the illustration.

3 Set the camcorder’s Power Switch to “PLAY”.

 

 

 

 

4 Set “REC MODE” to “SP” or “LP”. ( pg. 35)

 

 

5 Start playback on the player.

 

 

6 Press the Recording Start/Stop Button to

 

To DV IN*/OUT

engage the Record-Pause mode.

 

● The “ DV IN ” indication appears on the screen.

 

 

 

 

7 At the point you want to start dubbing, press

 

 

the Recording Start/Stop Button to start

 

 

dubbing. The

indication rotates.

Video unit equipped with DV connector

8 Press the Recording Start/Stop Button again

 

 

* GR-D650E only

 

to stop dubbing. The

indication stops

 

rotating.

 

 

To use this camcorder as a player

 

 

9 Press 8 to return to the normal playback

1 Make sure all units are turned off.

mode.

 

 

2 Connect this camcorder to a video unit

NOTE:

 

 

equipped with a DV input connector using a DV

Digital Dubbing is performed in the sound mode

cable as shown in the illustration.

recorded on the original tape, regardless of the

3 Start playback on the camcorder. ( pg. 23)

current “SOUND MODE” setting. ( pg. 33)

4 At the point you want to start dubbing, start

 

 

 

recording on the video unit. (Refer to the video

 

 

 

unit’s instruction manual.)

 

 

 

 

5 To stop dubbing, stop recording on the video unit, then stop playback on this camcorder.