
.
PAUSE or
2)At the point you want to zoom
in, press the Zoom Button (T).
Zoom (T/W)
(Up)
●To zoom out, press the Zoom
Button (W).
SLOW (YI) SLOW (IU)
PLAY | (Right) | |
(Left) | ||
| ||
SHIFT | STOP or | |
| (Down) |
During normal video playback, press SLOW (YI or IU) more than approx. 2 seconds.
●After approx. 10 minutes, normal playback resumes.
●To pause
●To stop
NOTES:
●You can also engage
●During
●After SLOW (YI or IU) is pressed and held, the still image may be displayed for a few seconds, followed by a blue screen for a few seconds. This is not a malfunction.
●During
3)You can move the image on
the screen around to find a particular portion of the picture. While holding down SHIFT, press (Left),
(Right),
(Up) and
(Down).
●To end zoom, press and hold W until magnification returns to normal. Or, press STOP (8) and then press PLAY (U) during video playback.
●To end zoom during D.S.C. playback, press PLAY (U).
NOTES:
●Zoom can also be used during
●Due to digital image processing, the quality of the image may suffer.
Playback Special EffectsAllows you to add creative effects to the video playback image.
SEPIA: Recorded scenes have a brownish tint like old photos.
MONOTONE: Like classic black and white films, your footage is shot in B/W.
CLASSIC: Gives recorded scenes a strobe effect.
STROBE: Your recording looks like a series of consecutive snapshots.
1) To start
During normal or still playback, press SLOW (IU) repeatedly for forward or SLOW (YI) repeatedly for reverse. Each time SLOW (YI or IU) is pressed, the frame is played back.
Playback ZoomMagnifies the recorded image up to 47X at any time during video playback and D.S.C. playback.
1)Press PLAY (U) to start video
playback. Or perform normal playback of images.
playback, press PLAY (U).
2)Press EFFECT. The
PLAYBACK
EFFECT Select Menu appears.
3)Press EFFECT repeatedly to move the highlight bar to the desired effect.
● The selected function is activated and after 2 seconds the menu disappears.
● To deactivate the selected effect, press EFFECT ON/OFF. To reactivate the selected effect press EFFECT ON/OFF again.
● To change the selected effect, repeat from step 2 above.