MENUS FOR DETAILED ADJUSTMENT EN 35
●Performing any operation during the demonstration stops the demonstration temporarily. If no operation is performed for more than 3 minutes after that, the demonstration will resume.
NOTES:
●If a cassette is in the camcorder, the demonstration cannot be turned on.
●“DEMO MODE” remains “ON” even if the camcorder power is turned off.
DSC
[ ] =
QUALITY
[FINE] / STANDARD
The Picture Quality mode can be selected to best match your needs. Two Picture Quality modes are available: FINE ( 
) and STANDARD ( 
) (in order of quality).
The number of storable images depends on the selected picture quality as well as the composition of the subjects in the images and the type of memory card being used. ( pg. 27)
IMAGE SIZE
640 x 480 / 1024 x 768 / [1280 x 960]
The Image Size mode can be selected to best match your needs. ( pg. 27)
NOTE:
The setting can be changed only when the VIDEO/ MEMORY Switch is set to “MEMORY”.
REC SELECT
[ 
(TAPE)]: When Snapshot recording is performed with the VIDEO/MEMORY Switch set to “VIDEO”, still images are recorded only onto the tape.
/
(TAPE/CARD): When Snapshot recording is performed with the VIDEO/ MEMORY Switch set to “VIDEO”, still images are recorded not only onto the tape but also in the memory card (640 x 480 pixels).
Playback Menus
[ ] =
SOUND MODE and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture.
According to the menu access explanation on page 35, select “SOUND MODE” or “NARRATION” from the Menu Screen and set it to the desired parameter.
The settings below are effective only for video playback except “BRIGHT”, “16:9” and “REC MODE”.
The parameters (except “OFF” in ON SCREEN, SOUND MODE and NARRATION settings) are the same as in the description on
SP |
| REC MODE | [SP*] / LP |
| LP |
|
|
|
|
|
|
Allows you to set the video recording mode (SP or LP) depending on your preference.
* SP indicator does not appear on the screen.
SOUND MODE
[STEREO 
]: Sound is output on both “L” and “R” channels in stereo.
SOUND L 
: Sound from the “L” channel is output.
SOUND R 
: Sound from the “R” channel is output.
NARRATION
[OFF]: Original sound is output on both “L” and “R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R” channels in stereo.
MIX: Original and dubbed sounds are combined and output in stereo on both “L” and “R” channels.
BRIGHT
pg. 17, “Brightness Adjustment Of The Display”.
DATE/TIME
[OFF]: The date/time does not appear.
ON: The date/time is always displayed.
ON SCREEN OFF / [LCD] / LCD/TV
When set to “OFF”, the camcorder’s display disappears.
TIME CODE [OFF] / ON
pg. 22 “Time Code”
TV 16:9
To enable your tv to display images in 16:9 wide mode, set the tv screen size correctly.
[4:3TV]: For TV with an aspect ratio of 4:3
16:9TV: For TV with an aspect ratio of 16:9