1 Make sure all units are turned off.
Connections To A TV Or VCR 2
Connect the camcorder to a TV or VCR as shown in the illustration.
| If using a VCR, go to step 3. | |
| If not, go to step 4. | |
| 3 Connect the VCR output to the TV input, | |
| referring to your VCR’s instruction manual. | |
To AV | 4 Turn on the camcorder, the VCR and the | |
TV. | ||
connector | ||
5 Set the VCR to its AUX input mode, and set | ||
or | ||
the TV to its VIDEO mode. | ||
| 6 Start playback on the camcorder. | |
Audio/Video cable | ( pg. 21) | |
● Please set “16:9 OUTPUT” of Playback Menus | ||
(provided) | ||
so that the image may suit your TV (16:9 TV or | ||
| ||
| 4:3 TV). ( pg. 32, 33) | |
| To choose whether or not the following | |
| displays appear on the connected TV | |
| ● Date/Time | |
| Set “DATE/TIME” to “ON” or “OFF” ( pg. 33). | |
| ● Time Code | |
TV | Set “TIME CODE” to “ON” or “OFF” ( pg. 33). | |
| ● Indications other than date/time and time code | |
| Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV” | |
VCR | ( pg. 33). |
NOTES:
RECORDING & PLAYBACK
1Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)
2Red to AUDIO R IN*
3White to AUDIO L IN*
* Not required for watching still images only.
●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)
●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to“REC”, then set your TV to the appropriate input mode.
●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.