Menus For Detailed Adjustment EN 33
Playback Menus
The settings below are effective only for video playback except “REC MODE” and “SNAP/SLOW”.
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the sound to accompany your playback picture.
| Menus |
|
| Settings: [ ] = |
| SOUND L/R | [STEREO | ]: Sound is output on both “L” and “R” channels in stereo. | |
|
| SOUND L : Sound from the “L” channel is output. | ||
|
| SOUND R : Sound from the “R” channel is output. | ||
| NARRATION |
|
| Although it is not possible to perform audio dubbing with |
|
|
|
| |
PLAYBACK |
| this camcorder, you can hear sound from an | ||
|
| stereo. | ||
|
| during playback using this function. | ||
|
| [OFF]: Original sound is output on both “L” and “R” channels in | ||
|
| ON: | stereo. | |
|
| Dubbed sound is output on both “L” and “R” channels in | ||
|
| MIX: | Original and dubbed sounds are combined and output in | |
|
|
| stereo on both “L” and “R” channels. | |
|
| 30, “SNAP/SLOW”. | ||
| SNAP/SLOW |
|
|
|
| REC MODE | 30, “REC MODE”. | ||
DUB/COPY |
| [OFF]: When the SNAPSHOT button is pressed during tape | ||
[T]Z[M] COPY |
| playback, the playback image pauses and normal playback | ||
|
| will resume after approximately 6 seconds. (The still image is | ||
|
|
| ||
|
|
| not recorded.) | |
|
| ON: | Enables dubbing of images recorded on a tape to a memory | |
|
|
| card. | |
Each setting (except “OFF” in “ON SCREEN”, “DATE/TIME” and “TIME CODE”) is linked with “DISPLAY”, which appears when the Power Switch is set to “REC”.
The parameters (except “OFF” in “ON SCREEN” setting) are the same as in the description on
31.
Menus | Settings: [ ] = |
ON SCREEN | OFF / [LCD] / LCD/TV |
When set to “OFF”, the camcorder’s display disappears.
DISPLAY | DATE/TIME | [OFF] / AUTO / ON | |
TIME CODE | [OFF] / ON | ||
| |||
|
| 20, “Time Code” | |
| WIDE TV | [ON] 16:9/ OFF 4:3 |
31, “WIDE TV”
LCD BRIGHT | 18, “Brightness Adjustment Of The Display” |
SETTING 
Each setting (except “DEMO MODE”) is linked with “SETTING”, which appears when the Power Switch is set to “REC”.
The parameters are the same as in the description on 32.
ENGLISH
