VIDEO PLAYBACK

EN 23

 

 

NOTES:

A Black to S-VIDEO IN (Connect when your TV/

● Before starting Blank Search, if the current

VCR has S-VIDEO IN and A/V input

connectors. In this case, it is not necessary to

position is at a blank portion, the camcorder

searches in the reverse direction. If the current

connect the yellow video cable.)

position is at a recorded portion, the camcorder

B Yellow to VIDEO IN (Connect when your TV/

searches in the forward direction.

VCR has only A/V input connectors.)

● If the beginning or end of the tape is reached

C Red to AUDIO R IN*

during Blank Search, the camcorder stops

D White to AUDIO L IN*

automatically.

* Not required for watching still images only.

●A blank portion which is shorter than 5 seconds of

tape may not be detected.

 

NOTE:

● The detected blank portion may be located

The S-Video cable is optional. Be sure to use the

between recorded scenes. Before you start

YTU94146A S-Video cable. Consult the JVC

recording, make sure there is no recorded scene

Service Center described on the sheet included

after the blank portion.

 

in the package for details on its availability.

 

 

 

 

Make sure to connect the end with a core filter

Connections To A TV Or VCR

to the camcorder. The core filter reduces
interference.

 

Open the cover.

1 Make sure all units are turned off.

 

2 Connect the camcorder to a TV or VCR as

To S connector

 

 

 

 

 

 

shown in the illustration.

 

 

 

 

If using a VCR, go to step 3.

 

 

 

 

If not, go to step 4.

 

 

 

 

3 Connect the VCR output to the TV input,

 

 

To AV connector

referring to your VCR’s instruction manual.

 

 

 

 

4 Turn on the camcorder, the VCR and the TV.

 

 

 

 

5 Set the VCR to its AUX input mode, and set

S cable

 

 

AV cable

the TV to its VIDEO mode.

 

 

6 Start playback on the camcorder. ( pg. 22)

(optional)

 

 

(provided)

 

 

 

 

To choose whether or not the following

 

 

 

 

displays appear on the connected TV

 

 

 

 

● Date/time

1

2

3

4

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.

( pg. 36, 41)

 

 

 

 

 

 

 

 

Or, press DISPLAY on the remote control to turn

 

 

 

 

on/off the date indication.

TV

 

 

 

● Time code

 

 

 

 

Set “TIME CODE” to “ON” or “OFF”.

 

 

 

 

( pg. 36, 41)

 

 

 

VCR

● Indications other than date/time and time code

 

 

 

 

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.

 

 

 

 

( pg. 36, 41)

CONTINUED ON NEXT PAGE