24 EN

VIDEO PLAYBACK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Biphonic Playback (GR-DF570/

NOTES:

 

 

 

 

It is recommended to use the AC Adapter as

 

 

470 only)

the power supply instead of the battery pack.

 

 

( pg. 15)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To monitor the picture and sound from the

You can reproduce real three-dimensional

camcorder without inserting a tape or memory

acoustic fields on a conventional TV, VCR, or

card*, set the camcorder’s Power Switch to “A” or

stereo system connected to the camcorder.

M”, then set your TV to the appropriate input

1 Shoot a video in Biphonic Recording mode.

mode.

* GR-DF570/470 only

( pg. 51)

Make sure you adjust the TV sound volume to its

2 Connect the camcorder to a TV, VCR, or

minimum level to avoid a sudden burst of sound

when the camcorder is turned on.

stereo system. ( pg. 23)

 

 

3 Perform steps 1 3 in “Normal Playback”

 

 

( pg. 22).

 

 

4 Press BIPHONIC to change the setting.

 

 

 

 

 

 

 

A” or “

 

 

 

A”*: Biphonic mode is

 

 

automatically engaged when the camcorder

 

 

detects footage recorded with the Mic for

 

 

Biphonic while “AUX MIC” is set to “BIPHONIC”.

 

 

 

 

 

 

 

ON” or “

 

 

 

ON”*: Biphonic mode is

 

 

 

 

 

 

 

 

 

 

engaged.

 

 

No indication: Biphonic mode is disengaged.

 

 

*

 

 

 

” appears when the camcorder detects

 

 

 

 

 

 

 

footage recorded while “AUX MIC” is set to “OFF”

NOTES:

As long as you use the Mic for Biphonic, even if “AUX MIC” is set to “OFF” on Biphonic Recording, you can obtain a Biphonic effect by selecting

ON” on the playback.

Make sure that Biphonic mode is disengaged when you use headphones at Biphonic playback to obtain genuine Biphonic effect.

When you use a microphone other than the Mic for Biphonic during Biphonic Recording, you cannot obtain an expected effect even if “ ON” or “ ON” is selected on the playback.

5 To start playback, press 4/9.

NOTES:

Stereo speakers (incorporated in a TV) are required for Biphonic playback.

Biphonic effect is maximized in the following cases:

• When you enjoy the video on a big screen TV.

• When the distance between the left and right speakers is sufficient.

• When you position at

front center of both speakers.