1 Perform steps 1 – 3 in “To Print All Still Images (One Print For Each)”.
2 Press 
or 
to select “RESET”, and press SET. The DPOF screen appears.
Initialising A Memory CardYou can initialise a memory card any time. After initialising, all files and data stored in the memory card, including those which have been protected, are cleared.
3 Press 
or 
to select “EXECUTE”, and press SET. The normal playback screen appears.
●To cancel selection, select “RETURN”.
●The number of prints is reset to 0 for all still images.
CAUTION:
While performing the above, never disconnect power, as this may cause the memory card to be corrupted.
1 Set the VIDEO/MEMORY Switch to “MEMORY”.
2 Set the Power Switch to “PLAY” while pressing down the Lock Button located on the switch.
3 Press MENU. The Menu Screen appears.
4 Press | or | to select |
| FORMAT | ||
“FORMAT”, and press | ERASE ALL | |||||
SET. The FORMAT | ||||||
EX I ST I NG DATA? | ||||||
screen appears. |
|
|
| |||
5 Press | or | to select |
|
|
| |
| EXECUTE | |||||
“EXECUTE”, and press SET. The memory card is initialised.
RETURN
●When initialisation is finished, “NO IMAGES STORED” or “NO
●To cancel initialisation, select “RETURN”.
CAUTION:
Do not perform any other operation (such as turning off the camcorder) during initialisation. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during initialisation. If the memory card becomes corrupted, initialise it.