WARNING INDICATIONS
(high)

(exhausted)

Displays the battery remaining power level. As the battery power comes close to nil, the battery indicator

blinks (battery power warning). When the battery power is exhausted, power turns off automatically.

Appears when no tape is loaded.

( pg. 9)

CHECK TAPE’S ERASE PROTECTION TAB

Appears when the erase protection tab is set to “SAVE” while the Power Switch @ is set to “ ” or “” and the VIDEO/MEMORY Switch t is set to “VIDEO”. ( pg. 9)

HEAD CLEANING REQUIRED USE CLEANING CASSETTE

Appears if dirt is detected on the heads during recording or playback. Use an optional cleaning

cassette.

( pg. 49)

CONDENSATION, OPERATION PAUSED PLEASE WAIT

Appears if condensation occurs. When this indication is displayed, wait more than 1 hour until condensation disappears.

TAPE!

Appears if a tape is not loaded when the Recording Start/Stop Button ! or SNAPSHOT Button 9 is pressed while the Power Switch @ is set to “ ” or “” and the VIDEO/MEMORY Switch t is set to “VIDEO”.

TAPE END

Appears when the tape ends during recording or playback.

SET DATE/TIME!

 

• Appears when the date/time is not set.

( pg. 10)

Appears when the built-in clock (lithium) battery is discharged and the previously set date/time is erased.

( pg. 49)

LENS CAP

Appears for 5 seconds after power is turned on if the lens cap is attached.

A. DUB ERROR!

Appears if Audio Dubbing is attempted on a blank

portion of a tape.

( pg. 40)

A. DUB ERROR!

<CANNOT DUB ON A LP RECORDED TAPE> <CANNOT DUB ON A 16BIT RECORDING> <CHECK TAPE’S ERASE PROTECTION TAB>

Appears if Audio Dubbing is attempted on a tape recorded in the LP mode.

Appears if Audio Dubbing is attempted on a tape recorded in 16-bit audio.

Appears if A. DUB (e) S on the remote control is

pressed when the erase protection tab is set to

“SAVE”.( pg. 40)

INSERT ERROR!

Appears if Insert Editing is attempted on a blank

portion of a tape.

( pg. 40)

INSERT ERROR!

<CANNOT EDIT ON A LP RECORDED TAPE> <CHECK TAPE’S ERASE PROTECTION TAB>

Appears if Insert Editing is attempted on a tape recorded in the LP mode.

Appears if INSERT (w) A on the remote control is

pressed when the erase protection tab is set to

“SAVE”.

( pg. 40)

MEMORY IS FULL

Appears when the memory card’s memory is full and shooting is not possible.

COPYING FAILED

Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder.

COPYING FAILED <MEMORY CARD!><MEMORY IS FULL> <PLEASE FORMAT>

Appears in the following cases when dubbing from a tape to a memory card:

when no memory card is loaded.

when the memory card's memory is full.

when the memory card is not formatted.

MEMORY CARD!

Appears if there is no memory card loaded when you attempt to record on a memory card or access data on a memory card.

PLEASE FORMAT

Appears when there is a problem with a memory card and its memory is corrupt, or it has not been initialised.

Initialise the memory card.

( pg. 24)

NO IMAGES STORED

Appears if there are no image files stored on the memory card when you attempt memory card playback.

NO E-MAIL CLIP STORED

Appears if there are no video clip files stored on the memory card when you attempt memory card

playback.

( pg. 22)

EN

56 INDEX