LIGHT OFF/AUTO/ON Switch
DANGER
■The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.
■Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.
■When operating, keep a distance of about 30 cm. between the video light and people or objects.
■Do not use near flammable or explosive materials.
■It is recommended that you consult your nearest JVC dealer for replacing the video light.
EN19
FEATURE: Video Light
PURPOSE:
To brighten the scene when natural lighting is too dim.
OPERATION:
1)Set the LIGHT OFF/AUTO/ON Switch as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the camcorder senses insufficient lighting on the subject.
ON : Always keeps the light on as long as the camcorder is turned on.
■ The video light can only be used with the |
| ||
camcorder’s power on. |
|
| |
■ It is recommended to set the white balance |
| ||
| |||
(☞ pg. 32) to | when you use the video light. |
| |
■ When not using the video light, turn it off to save | RECORDING | ||
battery power. |
|
| |
|
|
| |
NOTES: |
|
|
|
● Even if the battery indicator ( | ) does not blink if |
| |
the battery pack’s charge is low, the camcorder may |
| ||
turn off automatically when you turn on the video |
| ||
light, or when you start recording with the video light |
| ||
turned on. |
|
|
|
● When the LIGHT OFF/AUTO/ON Switch is set to |
| ||
“AUTO”: |
|
|
|
•Depending on the lighting conditions, the video |
| ||
light may keep turning on and off. In this case, |
| ||
manually switch the light on or off using the |
| ||
LIGHT OFF/AUTO/ON switch. |
|
| |
•While the “Sports” or “High Speed Shutter” mode |
| ||
(☞ pg. 23) is engaged, the light is likely to stay on. |
| ||
•While the “Twilight” mode (☞ pg. 23) is engaged, |
| ||
the light will not activate. |
|
| |
