JVC GR-SXM321 specifications Playback, UsingTheCassetteAdapterEN33, Cassette Adapter VHS Playpak

Load the cassette adapter into the VCR and play the tape back as you would any other.

PLAYBACK

UsingTheCassetteAdapterEN33

Cassette Adapter (VHS Playpak)

Use this to play back an S-VHS-C/VHS-C video cassette recorded with this camcorder on a VHS VCR. It is fully compatible with any S-VHS/VHS video cassette recorder. The C-P7U adapter is battery powered and automatically performs tape loading and unloading.

	1	Slide the battery cover up to remove it, install one
		“AA (R6)” size battery as shown, then reattach the
		cover.
VCR		Slide the latch to open the adapter compartment
	2 door, then insert the cassette and close the compart-

ment door.

Compartment door

Sliding latch

Compact video cassette

Reels

3

4 Slide the latch and the compartment door opens automatically. This may take around 10 seconds. Do not attempt to force the adapter open. Then, insert your finger in the hole on the underside of the adapter as shown in the illustration at left, and push up and remove the cassette.

NOTES:

●During tape loading and unloading, do not touch the reels for safety and tape protection.

●Tapes recorded in S-VHS or S-VHS ET mode cannot be played back on a regular VHS VCR. Playback is possible with a VCR equipped with the S-VHS or SQPB (S-VHS QUASI PLAYBACK) function.

●During special-effect playback (slow motion, still frame, etc.), the picture may vibrate or noise bars may appear on the screen.

●To record on a VCR using a compact cassette and the adapter, cover the adapter’s recording safety hole with adhesive tape.

Recording safety hole